Zero Force Xray NT1 Bearing Kit Set
 

Zero Force Xray NT1 Bearing Kit Set (16pcs) (ZF-N12004)

Attachment 995105

www.rcgoods.com

NT1 Gurus assistance required!
 

Hi

Tried to install my STS into NT1 tonight and found the gear mesh tight with it. At first I thought it might have needed shims behind the collet, but that really made no difference. Is it simply a case of the holes on the crank case being different? And is there any other way to adjust it?

I ended up taking it out as it will just strip being that tight.

Help appreciated as always

Thanks
Andrew

First try loosening the upper engine mount screws and then re tighten them wile you are still pulling the engine apart from the spur gears. If still to tight just widen the mount holes on the engine's case.

Can I identify that I have hobbyshop and we sell xray NT1 Spareparts and items?

Thanks

Where are you located?

I thought that might have been the case, bit of an over sight by Mr Hudy with his design. It would be easy to address with a revision to the chassis plate and some different mounting screws like Capricorn has done with the C01/C02.

I've found that having a little adjustment in the upper mount made up for a slight variance in the spur gears..A little tweaking made for smooth static rolling.

In malaysia. This is my website : www.trusthobbyracing.com . Currently we are not updated yet but you can send me a message at [email protected] if you need anything .we are the distributor of many items too such as murnan modified engines, hot race tyres,hipex exhaust and kosmic fuel .but we sell xray parts too at a very affordable price..

We sell worldwide


Thanks

NT1 2 option parts

hay all

can anyone tell me what the progressive springs do and how they would help

thanks

hay all

can anyone tell me what the progressive springs do and how they would help

thanks

Interesting Xray release a lower engine mount now.. this should have been included in the 2012 kit. their is no point running the 2012 chassis plate with the standard engine mount as it just give syou a massive gap under the engine.

:nod::nod:

Hi,

any idea what is the height difference between lower engine mount & the original standard engine mount???

propably .4mm lower like the engraved part in the chassis.