brianhatesnitro

iTrader: (1)

thanks for the part #'s guys, those tools rock.

doki_doki

iTrader: (2)

I have been also using these tools for quite some time now. So far, no problems with it. I especially like the tool for removing the gears. It saves your gears and it doesn't damage the lightened clutch bell...

Team Kamikaze

iTrader: (3)

Hey guys the KYOSHO V ONE RRR EVO W.C, TEAM EDITION is back in stock again.

SOLOARTIST 702

must be nice see ya

GMartinez

iTrader: (91)

What's up Will what's the deal with the double avatar you know you can't drive both cars at the same time

bvoltz

iTrader: (44)

Does anyone have all of the following in stock?

Qty Item Description
2 VZW220 - SP FRONT SPOOL SHAFT (RRR/RRR EVO/SIII)
2 VZ242-4517 Front Spring Blue (4.5-1.7) (I'm assuming these are the one on the WC kit)

2 VZ243-5017 Rear Spring Blue (5.0-1.7) (I'm assuming these are the one on the WC kit)

3 VZ245 - BELL GUIDE WASHER
1 VZ113-59 1ST SPUR GEAR (0.8M/59T)
1 VZ113-60 1ST SPUR GEAR (0.8M/60T)
1 VZW215-15 1ST STEEL GEAR (0.8M/15T) (FOR RRR)
1 VZW215-16 1ST STEEL GEAR (0.8M/16T) (FOR RRR)
1 VZW215-17 1ST STEEL GEAR (0.8M/17T) (FOR RRR)
1 VZ210 REAR SUSPENSION ARM SET (RRR)
2 72106172 O.S. Header Pipe Spring

V1R racer

Hi all
Im looking for a blank downloadable setup sheet for the RRREvo.


Thanks

bvoltz

iTrader: (44)

This is as close as it gets as far as I know....

http://www.kyoshoamerica.com/setupsheets/

Tommy Bergfeldt

I made a fillable EVO-sheet a couple of weeks ago, you can print it using the Adobe Reader but you'll need a full version of Acrobat to save a copy of the filled out form on your computer.

http://www.home.no/bergfeldt/RRR%20S...able%20RRR.pdf

Fredda

Hi guys i just placed an order for the evo wce. and the question, is there anything in particular i should think of when assembling it? does it come with diffs for both front and rear or is it just rear?

nitro_moe

Cogratulations on making a fine desicion..

Regarding your question,, as always the answer is to log on to www.nitrokb.com. You'll find all your answers in there plus a lot of info that will benefit you in the future. To top it off, the web site has been created by one of this forum's very own (rmdhawaii).

Enjoy and good luck..

Ivan Dickson

iTrader: (32)

Welcome to the RRR Franchise.

brianhatesnitro

iTrader: (1)

Can anybody explain the front sway bar offset inserts to me? I found an old post by dom saying that he was going to explain it, but couldn't actually find it.

robert maestrey

thats your eccentric on right and left arms....this allows you to have more adjustments when stting your downstops...hope this helps..

robert maestrey

check out www.nitrokb.com tons of information regarding build tips and what too look for... hope this helps. thanks to Rainer