garen

iTrader: (7)

big holes up

rubberneck

just ordered a set of these pistons can anyone tell me if i should run these in stock shock setup on my 8t or should i do the vented cap with foam compensator mod?

Slider30250

Run them with a stock cap.

rubberneck

thanks for help slider

garen

iTrader: (7)

Have you (or anyone else reading) tried them with a vented cap and foam compensator? I'll be putting my buggy back together soon and I wanted to try vented caps with foam, of course with the Fioroni pistons.

rfleck

iTrader: (58)

On hard packed tracked with big jumps, yes they work well.

KingdomRacer

iTrader: (5)

+1 buggy & truggy

rnelias

iTrader: (11)

I don't like the idea of a wearable part in a piece that I don't disassembly very often such as shocks (well, I'm not a top racer anyway...). Thus, I wonder know how long these O-rings last. Just an estimative. 2-3 days racing?!

The track that I'm used to race has low traction and is very rough. No big jumps and I'm seriously considering the CSI C (red).

dooug1960

iTrader: (6)

garen why is it that these pistons are always out of stock 16mm not sure ive ever seen them in stock at a-main.

Buggy Master

iTrader: (37)

garen, pm sent.

mxr17

Hi all . Just got a set of those to fit a mbx6 R , what oils are you using inside the shocks on a low traction and bumpy track ?
The idea seems really great ,can not wait to try but we still have snow here in Finland for at least 2month more...

sn47som1

iTrader: (8)

I believe the correct way is with the big holes up. I run them facing up.

Slider30250

Normally I run a 550 or a 600 Mugen oil up front and a 450 or a 500 Mugen oil rear. I almost always run a 100 Cst difference from front to back.

Slider30250

I haven't run the Fioroni pistons with a compensated cap, the last time I did that was with the Mugen option 6 hole black pistons. The damping felt too soft with the compensated caps, like I went down 2 steps in oil weight.

Norbert50p

iTrader: (7)

I have a 16mm pistons that i need to let go, 35 bucks shipped if anyone is interested please pm me.