Official VP Pro USA Thread
#811
Tech Elite
iTrader: (80)
i ran the premounted UF Axeman all weekend and they were Dialed!
#814
Tech Elite
iTrader: (80)
Arrow GTR.21 after 1gal...!
ok guys well I got about 1gal swallowed up by my Arrow. I ran it all weekend at the Rc Pro Series in St.Louis. weather was steadily changing from cold and rainy to hot and humid at the end of the week. track was med size(170X75), smooth and damp at first then slowly started to dry out and groove up. all i gotta say the engine worked superb,,,absolutely zero hiccups, no flame-outs, great smooth and clean power band, and would idle all day long if you let it
here's a few pics of the piston and sleeve after 1gal. I'm running a 6.5mm nova insert, )OS P3 plug, and VP-Pro RS-1 pipe and Byrons 30/11 fuel. I run a Agama buggy with stock clutch setup. I will be taking out the break-in shim and start race tuning it and monitoring my lap times now that its broken in. I'll keep you guys posted.
here's a few pics of the piston and sleeve after 1gal. I'm running a 6.5mm nova insert, )OS P3 plug, and VP-Pro RS-1 pipe and Byrons 30/11 fuel. I run a Agama buggy with stock clutch setup. I will be taking out the break-in shim and start race tuning it and monitoring my lap times now that its broken in. I'll keep you guys posted.
#817
Tech Master
iTrader: (11)
I'll be running this weekend at the JConcepts Spring Nats in Omaha, NE and have 2 sets of the Med T.T., looking forward to seeing how they are on a dusty/blue-groove surface.
I do wish we had a VP Step Pin Truggy tire to choose from. Up here in the North, about 75% of our tracks are dry/dusty/loamy and Calibers/Sub-Cultures/City Blocks tend to be the choice.
#824
Gene what pipe you been testing with the Arrow? I saw people talking the 2050 and the 2060 pipe for it? Also any idea on mileage you been getting? thanks
#825
OS-2060 or Mugen 2042. I'm getting 9-10 so far but still breaking them in. Should be a 10-12 min motor. Arrow claims they get 14-15 min in Taiwan at their local track.