I use to mount them on the mount but under closer tk the chassis but since I started using the ko radio the receiver is so small the transponder actually fits in the radio box with it. But I plug it into the receiver

ROAR Nats bud.....

Missouri State Pro Series Race #2

The same weekend at Nats.......... No wonder why we dont have good showings at big races...

You can mount it on top like that, or even better, use the same mounting holes in the radio tray, but mount it on the bottom. It will be closer to the timing loop for cleaner reception with the timing system and it will also keep the center of gravity lower on the chassis.

i always mount mine low. looks cleaner to me

:nod::nod:

me too!:nod: except i am running the airtronics radio system!:sneaky:

I have a spektrum sr3100t reciever. what port should I plug it into? The only open ports I have is a 3.3 volt port or the bind port

It should be plugged into the 3rd channel or "AUX" channel on the spektrum receiver.;)

Then where should the reciever battery be plugged into?

Into the port that say BATT/BIND

As Token said, the Batt/Bind port.;)

my bind port says bind/rs

So if I do that the reciever won't burn out?