the set up sheet is wrong, it has the old shock tower on it, including the old positions

Ok and the correct set up is?????

The cam is the part that pressed against the inner pad and makes the brake work. There's one in the front and one in the back and they rotate to actuate the brakes. If you do t get it togeather correctly then it doesn't work.

Guys, with its price, I wonder, is it better than MBX6 and Xray 808? 'cause i found out in amainhobbies.com that it's more expexsive than MBX6 and Xray 808

Well????

8T 599
808 - 599
MBX6T 579 or 569 depending on the verison........

And its not which ones better, its which one do you want.... We can argue for 25 pages in 2 hours on which ones better, but it all comes down to you. There are literally 127 threads asking which ones better, and if you read through all the BS you will come out on the other end still not knowing. There only argument on the fourm that has a overwhelming product support is Hitec servos, ever thing else is an argument.

impatient i see


lot of people argue about the camber but i run the otter hole on the shock tower and middle on a arm. for camber inner hole on hubs and the inner hole on the shock tower. i was pointing out that the picture and the set up positions were still on the V1 tower

Is there an official LOSI setup sheet for the V2.

@Shuming: got it!
Depends on my mind to choose its outside design.

No you just appear to have all the answers so I was wondering why you seem to be holding back now??

Just ordered my 8ight-t 2.0

Can you guys give me some quick initial setup tips and things to look for this thread has a LOT of pages:eek:

LOL This Losi Racer guy is always getting into trouble all over these forums:lol:
Its funny when you actually see them at their tracks they are usually
the worst drivers :lol::lol:

dose anybody know the part number for the Losi lightweight hubs?

Hey Frank, On losi website Drake has a updated setup sheet with new V2 tower.

Ya thats the one I was looking at and it is wrong. It shows the stock rear shock tower and stock setup. Losi_Racer was correct about that. Still looking for it.

It all depends on you. They are all very good and capable of winning, they are all durable, 2 years on my losi chassis and yet to break a part, not have I had to replace parts do to wear. I have upgraded, shock tower, rear bearing holder and top servo saver arm... Thats it. i know people will argue this and that, but they are all good trucks.