OCM KAOS DOMINATING
#1171
should know your full actual set-up but
1° of antisquat should be better on plenty of ruts
thinner oil up front and some toe-out on inserts at the frontarms
will give you a lot more off-power steering and rotation into curves
3 degrees camber/ toe-in and 1000 in the rear will relax your rear
going down in the center too, giving power to the front accelerating
so try 3000/3000/1000-2000 if it's real rough
1° of antisquat should be better on plenty of ruts
thinner oil up front and some toe-out on inserts at the frontarms
will give you a lot more off-power steering and rotation into curves
3 degrees camber/ toe-in and 1000 in the rear will relax your rear
going down in the center too, giving power to the front accelerating
so try 3000/3000/1000-2000 if it's real rough
Last edited by speedy2; 04-08-2008 at 07:12 AM.
#1173
Any updates on the big bore shocks?
#1175
the second wing with Kaos winglets
Last edited by speedy2; 04-07-2008 at 01:45 AM.
#1176
#1177
Tech Elite
iTrader: (24)
The wing wraps for the OCM hd type 1 & 2 wings will be available and listed today @ www.tnt-fx.com. These wings will also be available @ www.amainhobbies.com this week and come in white or yellow!
They are very strong, not easily bent, creased, warped, etc.....very strong and agile compared to other wings
If you dont own a OCM it would look good on many of the other brands as well! They should have a price of around $10.50 in stores.
Thanks!
AB
They are very strong, not easily bent, creased, warped, etc.....very strong and agile compared to other wings
If you dont own a OCM it would look good on many of the other brands as well! They should have a price of around $10.50 in stores.
Thanks!
AB
#1179
Tech Rookie
Hy
One question Alan , yo make your own wing stykers or you buy it? if you buy it , can you tell me where?
Alan could you tell me your set-up?
PD: I´m waiting OCM big Bores XD
One question Alan , yo make your own wing stykers or you buy it? if you buy it , can you tell me where?
Alan could you tell me your set-up?
PD: I´m waiting OCM big Bores XD
#1180
starter box
hey guys,
This weekend I raced for the second race of my season in conn. and was really happy with the buggy. It was smooth, flet stable and planted, and when pushed didn't traction roll or feel like it couldn't take the beat. I was just wondering what starter box everyone uses for the buggy and if you dremel out the bottom of the chassis where the flywheel sticks out. I have the little ofna black box and the bigger ofna yellow box, both don't really work well with the buggy.
Thanks
This weekend I raced for the second race of my season in conn. and was really happy with the buggy. It was smooth, flet stable and planted, and when pushed didn't traction roll or feel like it couldn't take the beat. I was just wondering what starter box everyone uses for the buggy and if you dremel out the bottom of the chassis where the flywheel sticks out. I have the little ofna black box and the bigger ofna yellow box, both don't really work well with the buggy.
Thanks
#1181
I've had my finger on the button to buy the buggy. Is it just me or did amain raise the price 100$? WTF! I could swear 2 days ago it was 349. Now they list it at 449. Sup with that?
#1183
What are the differences between the Kaos DT-19 and the DT-19 EVO?