![]() |
June 2020 Stock Results
Class-Stock PNR 3500kv
Date-6/30/2020 Location-Winston-Salem, NC Race Time-4:51.279 (291.279) Fastest Lap-3.539 Chassis-PNR2.5W Body-Ferrari 458 Italia Wheelbase-98mm Tires-K30 slick fronts, K20 radial rears Motor-Rocket 3500vk Batteries-Kyosho 800 Front Springs-PN Green T-Plate-PN Carbon #6 Motor Mount-PN 98mm v5 Dampener (If applicable)-PN DDS Dampener Fluid (If applicable)-None Gearing-PN 64p 13/53 Ball diff Notes-Car is very stable and quick, but with the brushless motor cars, I have difficulty recovering from a mistake and it costs me a lot of time. https://cimg8.ibsrv.net/gimg/www.rct...59122761c.jpeg https://cimg8.ibsrv.net/gimg/www.rct...9e1ad1f5d.jpeg |
June 2020 Pro Stock Results
Class-Pro Stock GT
Date-6/28/2020 Location-Winston-Salem, NC Race Time-4:38.657 (278.657) Fastest Lap-3.486 Chassis-MR-03 EVO Body-Ferrari 458 Italia GT2 Wheelbase-98mm Tires-K30 radial fronts, K20 radial rears Motor-Kyosho X-Speed (50T) Batteries-TRP 747s Front Springs-PN Purple T-Plate-Kyosho CF Hard Motor Mount-Kyosho stock plastic LM Pod Dampener (If applicable)-Kyosho DDS Dampener Fluid (If applicable)-None Gearing-Kyosho Ball Diff II with 6t pinion Notes-This was only my second run for June, with no real changes to setup other than shimming spring on oil shock to adjust sagging, and my time was 12 seconds faster than the first run and 8 seconds faster than my May time. Only one 5.xx sec lap and four 4.xx sec laps, remaining 70 laps were 3.xx sec. Don't think I can do much better than that. I'll take it! https://cimg7.ibsrv.net/gimg/www.rct...3a5fbcfe0.jpeg https://cimg6.ibsrv.net/gimg/www.rct...2f61c6010.jpeg |
June 2020 Stock Results
Class-Stock
Date-2020-06-26 Location-Phoenix, AZ Race Time-462 Fastest Lap-5.100 Chassis-MR03 Body-Kyosho Sauber Mercedes C9 Wheelbase-102mm Tires-Kyosho LM High Grip 20° fr/rr Motor-PNR 70t Batteries-Kyosho Speed House 800hv Front Springs-mr03 stock T-Plate-Kyosho carbon medium Motor Mount-Kyosho MJ aluminum (LM) Dampener (If applicable)-Kyosho Inner Tube Roll Shock Dampener Fluid (If applicable)-Mineral Oil Gearing-44t/8t Notes- Not allowed to post photos yet.... |
If you are a member of the M96WC group on Facebook, you can post a picture of your car and results there if you’d like. You can also edit this and other prior posts in the future and add pictures once you have that permission.
|
Risultati giugno 2020
Class-Stock giugno 2020
Data-2020-06-30 Luogo-L'Aquila-Italia Tempo di gara-285.6 Giro più veloce-3.64 Chassis-MR03 Corpo-Kyosho McLaren Passo-98 Pneumatici-V8-20 anteriori V1-R10 posteriori Motor -PNR 3500kw Batterie-750mha Molle anteriori-MR03 rosse T-Plate-Pnr 3 fibra di vetro Molle ammortizzatore centrale rosse foto RISULTATI su FB |
June 2020 Box Stock
Class- Box Stock
Date- 6/30/20 Location- Denton, TX Race Time- 356.3 Fastest Lap- 4.21 Chassis- MR03 Body- Audi R8 2010 LMS Wheelbase- 98mm Tires- Rear PN KS FR, Front Kyosho 20S Motor- Stock Batteries- EBL 800 Front Springs- PN Red T-Plate- Kyosho Carbon Hard Motor Mount- MM Dampener (If applicable)- Stock Dampener Fluid (If applicable)- N/A Gearing- 7T Pinion Notes- Tighter setup in the rear seams to let the car rotate more. Little bit of chatter I could never get rid of. Much improvement over May:) |
Box Stock June 2020
Box Stock June 2020
Class- Box Stock Date- June 16, 2020 Location- Houston, Tx Race Time- 374.9 Fastest Lap- 4.43 Chassis- MR-03 FHSS Body- R8 LMS Wheelbase- 98MM Tires- Rear K10 Radials Front K20 slicks Motor- Stock Batteries- EBL 1100 Front Springs- Kyosho Yellow T-Plate- PN-T2 Fiber Glass Motor Mount- MM Dampener (If applicable)- none Dampener Fluid (If applicable)- none Gearing- 7T Notes- Will post screen shot on Facebook. Can't wait to post a picture on this forum. |
Hello All,
Good to see some times get posted up. Bear with me, it is absolutely bonkers at work currently and we are full-on getting our house ready to show. I will try hard to get the July circuit posted up today but it may take a few days to get the results posted...... Bare with me and sorry about that. Cheers, Jim |
I was going to put in a time but forgot we were getting new washer and dryer yesterday and I had the track torn up. Oh well next month. I still need some parts in order to get into Box Stock class anyway.
No rush LJH, sorry to hear about your challenges but it sounds like the new house will be great! |
Originally Posted by LJH
(Post 15659096)
Hello All,
Good to see some times get posted up. Bear with me, it is absolutely bonkers at work currently and we are full-on getting our house ready to show. I will try hard to get the July circuit posted up today but it may take a few days to get the results posted...... Bear with me and sorry about that. Cheers, Jim Thanks for all you do! No hurry with the holiday weekend coming up. My guess is most of us our booked... Anyone have recommendations on where to get wheels for the 90mm narrow stock class(mainly rears)? I plan to convert over one of my MM chassis to RM and use this body I know I need 8.5mm with 0 offset, but I am not sure how to tell if the wheels will actually fit the drive dogs on the rears for certain. Thanks!! |
June Results
Hello All,
Very light participation in June, but here are the results: Box Stock- 3rd- Revto13G 374.9/4.43 2nd- FastJew- 356.3/4.21 1st- Traveler2- 315.2/3.75 Stock 90N 1st- Traveler2- 314.1/3.82 Stock 3rd- ekoorjr- 462.0/5.10 2nd- Traveler2- 291.3/3.54 1st- Medo998- 285.6/3.57 Pro-Stock 1st- Traveler2- 278.7/3.49 Open 2WD None FTM- Traveler2 278.7/3.49 in his Pro Stock Car. Please let me know if I missed anyone or anything. On behalf of our fearless leader, Jim, Cheers! |
Originally Posted by FastJew
(Post 15659145)
Thanks for all you do! No hurry with the holiday weekend coming up. My guess is most of us our booked...
Anyone have recommendations on where to get wheels for the 90mm narrow stock class(mainly rears)? I plan to convert over one of my MM chassis to RM and use this body I know I need 8.5mm with 0 offset, but I am not sure how to tell if the wheels will actually fit the drive dogs on the rears for certain. Thanks!! |
Originally Posted by Traveler2
(Post 15659170)
Pretty sure the stock wheels are 0N all the way around, so you should be able to use them. My preferred aftermarket wheels are the PN Delrin dish wheels. 20mm is standard (MR2076F0), but I like the 19mm diameter wheels (MR2079F0) on my 90N Ford Focus.
|
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Hello All, Good to see some times for the month and a HUGE thanks to Traveler for getting the results published. I wanted to get the July circuit posted for you guys. It is a bit short and not terribly technical so I am expecting some fast times. For July we are running clockwise and on the smooth side. https://cimg5.ibsrv.net/gimg/www.rct...04df4af09.jpeg |
Originally Posted by FastJew
(Post 15659292)
So is it safe to assume the Autoscale bodies come with wheels? I couldn't find anywhere to confirm that.
|
| All times are GMT -7. It is currently 02:09 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.