![]() |
Class- BOXSTOCK
Date- 09/30/2025 Location- Central Texas Race Time- 334.254 / 5:34.254 Fastest Lap- 3.918 Chassis- MR04 Body- McLaren 12C Wheelbase-98mm Tires- F-PN KS Medium LH / R- Marka V1R10 Wheels- F- N +1mm 20mm PN BBS White / R- W +2mm 20mm 3D wheels Black Motor- Kyo Stock Batteries- Gens Ace 750HV Front Springs- PN Red T-Plate- PN Carbon Fiber #4 Motor Mount-Kyo Stock MM Dampener (If applicable)- Kyo Spring shock (Red Spring) Dampener Fluid (If applicable)- Kyo 15k grease Gearing-7/44 Kyo Gear Diff- Notes- MR-04 Ready Set with Reflex 0* Aluminum Knuckles. New KS Medium fronts (super glued side walls) New Marke V1R10. Car was very good but the rear would step out under power in turns 1,2, and 3. Being sick the last 3 weeks killed my runs! I waited till the last minute, but this was the best I could do! 12C is now put 100% together (lights, body pieces) now just a dusting of color. On a side note I ran all these runs with Cham's new designed Tx wheel, and IT IS NICE!!!!!!!!! More to follow on it's own write up! https://cimg6.ibsrv.net/gimg/www.rct...c9105981ea.png https://cimg2.ibsrv.net/gimg/www.rct...e2fbfc366b.jpg https://cimg3.ibsrv.net/gimg/www.rct...f2167a9d24.jpg |
Class- STOCK
Date- 09/30/2025 Location-Central Texas Race Time- 312.574 / 5:12.574 Fastest Lap- 3.789 Chassis- PN 2.5W/MR03EVO board/ 04 arms Body-Jomurema Pink w/ Lexan roof and wing Wheelbase-98mm Tires-F-PN KS Soft / R- Marka V1R10 Wheels- F-PN N+1.5mm 19mm Flanged White 6 hole / R- PN W+2mm 20mm Yellow BBS Motor-PN 3500Kv Batteries- SpeedHouse 800HV Front Springs-PN Purple T-Plate-PN #3 Silver Carbon Fiber Motor Mount-PN V3 94/98mm Dampener (If applicable)- PN DDS ( Green top/ PN lt. purple X-Strenght bottom spring) PN Dual Spring Top Shock (Green Front/Purple Rear) Dampener Fluid (If applicable)-Dry Gearing-13/53 PN Ball Diff Notes- Car was ok, me not so much. I ran all 7 classes in 2 hours with about 30 laps of warm up for each class. By the 3rd class my rt arm was cramping. https://cimg2.ibsrv.net/gimg/www.rct...9710a56481.png https://cimg3.ibsrv.net/gimg/www.rct...d64754d5e4.jpg https://cimg4.ibsrv.net/gimg/www.rct...c9510ee7ae.jpg |
Class- PROSTOCK
Date- 09/30/2025 Location-Central Texas Race Time- 310.925 / 5:10.925 Fastest Lap- 3.697 Chassis- PN 2.5W/MR04EVO board/ 04 arms Body- Jomurema Pink w/Lexan roof and wing Wheelbase- 98mm Tires-F- PN KSK 540 / R- PN KSK 2030 Wheels- F- 3D Disk Wheels +1mm 20mm Blue / R- 3D Disk wheels +2mm 20mm Blue Motor-PN 5500Kv Anima Sensored Batteries- Eneloop 850HV Front Springs- Kyo Green T-Plate-PN #4 Black Fiber Glass Motor Mount-PN Multi Mount Dampener (If applicable)- PN DDS ( Green top/ Green bottom spring) PN Dual Spring Top Shock (Silver Stock Springs) Dampener Fluid (If applicable)-Dry Gearing-8/52 PN Ball Diff Notes- Car pretty good. It could have been faster, but with not driving for weeks I went for steady over speed. https://cimg9.ibsrv.net/gimg/www.rct...a477923c6f.png https://cimg7.ibsrv.net/gimg/www.rct...2fb9d10260.jpg https://cimg8.ibsrv.net/gimg/www.rct...3739de68e5.jpg |
Class- OPEN 2WD
Date- 09/30/2025 Location- Central Texas Race Time- 303.004 / 5:03.004 Fastest Lap- 3.656 Chassis- GL GLR Body- Jomurema White Lexan roof/wing Wheelbase- 98mm Tires-F- PN KS Medium LH (KS1138)/ R- Marka MZR-V1R05 Wheels- F- N+1mm 20mm 3D Disk wheels Blue / R- W+2mm 20mm 3D Disk wheels Black (no disk) Motor- GL 3500kv Batteries- GNB 350mAh 2S LiPO Front Springs-Blue T-Plate-N/A Motor Mount-GL 98mm Dampener (If applicable)- Short Center Shock (Blue Spring) / Yellow side springs Dampener Fluid (If applicable)- 25K Atomic grease- Center / 15K Atomic grease- Sides Gearing- 10/52 GL Ball Diff Notes- Car was very good as usual, If I had time to run a second run tonight I could have broken into the sub 5 minute run, but I ran out of time. I might try tomorrow before I switch to CCW! https://cimg7.ibsrv.net/gimg/www.rct...11af93016b.png https://cimg5.ibsrv.net/gimg/www.rct...9ae85c2104.jpg https://cimg6.ibsrv.net/gimg/www.rct...9e32a11b45.jpg |
Class- MX-5
Date- 09/30/2025 Location- Central Texas Race Time- 322.622 / 5:22.622 Fastest Lap- 3.840 Chassis- MR04EVO Body- Kyosho MX-5 Wheelbase- 90mm Tires-F- PN KS Medium LH (new KS1138) / R-PN KSM LH Soft Wheels- F-PN N 0mm 19mm Blue 3D Disk wheels no disk / R- DXR Black carbon -1mm 20mm Motor-PN Anima V4 3500Kv Sensored Batteries- Eneloop 850 Front Springs- PN Green T-Plate-PN #3 Black Carbon Fiber Motor Mount-Nexx 90/94mm RM Dampener (If applicable)- PN DDS (Purple top disk/Green bottom spring) Dampener Fluid (If applicable)-Dry Gearing-13/54 PN Ball Diff Notes- Car was very good, but my arm was cramping most the run, so my times didn't show how well the car does on this layout! I'll try tomorrow before going CCW just for chits and giggles! https://cimg8.ibsrv.net/gimg/www.rct...663ff1bb1f.png https://cimg9.ibsrv.net/gimg/www.rct...7bcb3dc753.jpg https://cimg0.ibsrv.net/gimg/www.rct...2ca6dbd9ef.jpg |
Class- PORSCHE
Date- 09/30/2025 Location- Central Texas Race Time- 318.573 / 5:18.573 Fastest Lap- 3.989 Chassis- MR04EVO Body- Porsche 911 GT3 RSR Wheelbase- 90mm Tires-F- PN KS Medium LH (new KS1138) / R-Marka V1R10 half worn but good grip still Wheels- F-PN N 0mm 19mm Black 3D Disk wheels #7 dsk / R- W 0mm 20mm Black 3D no dsk Motor-PN Anima V4 3500Kv Sensored Batteries- Eneloop 850 Front Springs- PN Red T-Plate-Nexx #4 Black Carbon Fiber Motor Mount-Nexx 90/94mm RM Dampener (If applicable)- PN DDS (Purple top disk/Purple bottom spring) Dampener Fluid (If applicable)-Dry Gearing-12/53 PN Ball Diff Notes- Porsche ran EXTREAMLY WELL! I had 1 screw up on lap 58 that added 3+ seconds, but other than that a awesome run for me!!! If I pushed it any faster and I would ROLL! Old Porsche body is very top heavy. Hope to get a new white body 911 in soon! https://cimg3.ibsrv.net/gimg/www.rct...cd58433072.png https://cimg1.ibsrv.net/gimg/www.rct...61e635039a.jpg https://cimg2.ibsrv.net/gimg/www.rct...2c091d66f9.jpg |
Class- NARROW
Date- 09/30/2025 Location- Central Texas Race Time- 333.539 / 5:33.539 Fastest Lap- 3.975 Chassis-MR03EVO Body-Yaris Wheelbase-90mm Tires- F-PN KS Medium LH (KS1138) / R- PN KSK535 Soft Wheels-F- 3D Disk N-0mm 19mm Blue #5 dsk / DXR N-0mm 20mm Gold 10spoke Motor-PN 3500Kv Batteries- SpeedHouse 800HV Front Springs-Kyo Orange (soft and short) on Inner Tube Shock Set dry T-Plate-Nexx #4 Motor Mount-Nexx 90/94mm MM Dampener (If applicable)- PN DDS Gold top and Bottom springs Dampener Fluid (If applicable)-Dry Gearing- 12/53 PN Ball Diff Notes- Car VERY good, Rt Arm was just worn out by this time, making many more mistakes than I should. https://cimg4.ibsrv.net/gimg/www.rct...314a420d4c.png https://cimg5.ibsrv.net/gimg/www.rct...56f259ee84.jpg https://cimg6.ibsrv.net/gimg/www.rct...aa26eb927f.jpg |
Originally Posted by joelisenat
(Post 16216475)
Had a question, saw pictures on the Facepage group of people using tape on the side rails. Are many people using that? Or is it allowed? I don't remember anything in the rules specifically speaking about it. It would be a help I'm sure but I've never wanted to use it just because I like to change layouts and it seems like it would be a pain, but maybe it isn't too bad to be peeling that stuff off constantly?
Originally Posted by AM03GT
(Post 16216555)
I also thought it wasn't allowed...
First off Sorry for the delayed response but I have been down for most of 3 weeks with covid. Also my laptop is still screwed up, so I leave it hooked up on the track, and I have a hard time with rctech on my phone (i'm not that phone savvy). To answer your question, there was never a hard rule either way on tape. I really never considered it as I was worried about the sticky residue left on the walls since we move our tracks around so much. BUT after a close look at my walls after a few years of my wall banging, I've reconsidered it, and ordered a roll! After a bunch of searching and reading and seeing the large tracks using it in pics from all over the world, I understand most use it to save their walls, with the added benifit of them not being soo snaggy. So until I'm told otherwise, meaning I missed it somewhere:p, I'm fine if ya want to tape ur walls. I'm going to start with the corners, as I always see tiny red foam chunks in my bodies and on my chassis after a run. Then in a few key areas I am wearing the walls down. We'll see if the red and white striped tape screws with my eyes too much!! :eek::blush: Have Fun!!! |
|
Class-Open 2wd
Date-10/01/25 Location-Central Wisconsin Race Time-7:18.988---438.988 Fastest Lap-5.2187 Chassis-Atomic MRZ-SF Body-Jomura Wheelbase-98mm Tires-F-PN Mediums, R-Gekko Mediums Motor-2500KV Batteries-350mah 7.4 Front Springs-Atomic Green T-Plate- Motor Mount-Stock Atomic Dampener (If applicable)-Atomic Dampener Fluid (If applicable)-25000 Gearing-10/53 Notes,Better runs this month, pleased with the progress |
No photos on this post as I can not post due to not reaching the limited post needed to post pictures. I have them loaded on the Facebook page.
Class- Boxstock Date- 9/8/25 Location- Houston, TX USA Race Time- 8:34.9201 Fast Lap- 5.500 Chassis- MR04 Body- McLaren 720S GT3 (Kyosho) Wheelbase- 98mm Tires- Kyosho 30° Super Low Height, Kyosho 20° Wide Radials Motor- factory white cap 70t Batteries- Speed House Mini Z 800HV Front Springs- Boxstock Black T-Plate- PN racing Carbon fiber #5 Motor Mount- factory Kyosho MM Dampener- factory Kyosho Dampener fluid- NA Gearing- 7t pinion factory gear diff spur (Kyosho) ------------------------------------------------------------------- Class- Porsche Cup Date- 9/5/25 Location- Houston, TX USA Race Time- 8:52.380 Fast Lap- 6.230 Chassis- MR04 Body- Porsche 911 GT3RS (Kyosho) Wheelbase- 90mm Tires- Kyosho 30° Super Low Height, Kyosho 20° Wide Radials Motor- factory white cap 70t Batteries- Speed House Mini Z 800HV Front Springs- Boxstock Black T-Plate- Boxstock (Kyosho) Motor Mount- factory Kyosho RM Dampener- factory Kyosho Dampener fluid- NA Gearing- 7t pinion factory gear diff spur (Kyosho) |
Pictures coming soon
Box Stock Class- BOX STOCK Date- 10/01/2025 Location- Lake Forest, CA Race Time- 5:09:89 / 309.89 Fastest Lap- 3.69 Chassis- Kyosho MR03 Rwd Body- Vett C8R Wheelbase- 98mm Tires- +1 PN KSK40/ +3 Marka 15 Radial Wheels- Nexx 20mm/ Discs +1/ Reflex 20mm +3 Motor- Stock Silver Can Batteries- Kyosho Speed House Front Springs- PN Red T-Plate- PN #4 Carbon Motor Mount- MM2 Dampener (If applicable)- No Dampener Fluid (If applicable)- Tamiya AW grease on upper shock Gearing- 7T Pinion (PN Pro Match) / Stock Differential (44T) Note- Kingpin flip mod, AE black grease inside gear diff to slow down action. The car felt edgy with harder tires bc humidity floated around 60-75% which is highest this year so far. I didn't have time to get a solid run with softer tires due to time and humid conditions. I will have to bring my track indoors on these days. Marka tires have radial tread almost gone, this changed the chracter of the cornering. It becomes loose when car is pitched aggressively. https://cimg0.ibsrv.net/gimg/www.rct...911a7ff4f9.jpg https://cimg9.ibsrv.net/gimg/www.rct...40ecdc9e31.jpg |
Stock
Class- Stock AAA (PNWC SPEC) Date- 10/1/2025 Location- Lake Forest, CA Race Time- 5:06.87 / 306.87 Fastest Lap- 3.59 Chassis- PN2.5 MR03 RWD Body- Jomu Wheelbase- 98mm Tires- FR +1 PN KSK40 / RR +3 Marka 15 slicks Wheels- Nexx / disc 20mm +1/ Reflex 20mm +3 Motor- PN 3500 kV Batteries- Powerowl 1100 mAh Front Springs- PN Soft Purple T-Plate- PN Carbon #4 Motor Mount- Nexx LCG Dampener (If applicable)- Nexx damper and dual spring shock Dampener Fluid (If applicable)- Dry Gearing- 16T Pinion 53 spur PNWC Spec, NEXX Light Weight Ball Diff Notes: Fast and easy to drive. PN Carbon #4 gave the car some more initial steering. https://cimg6.ibsrv.net/gimg/www.rct...cf446a2c32.jpg https://cimg1.ibsrv.net/gimg/www.rct...ebb85e5730.jpg |
September 2025 Box Stock
Class-Box Stock
Date-9/12/2025 Location-Winston-Salem, NC Race Time-306.469 Fastest Lap-3.825 Chassis-MR-03 FHSS Body-2012 NSX Wheelbase-98mm Tires-PN KS Firm fronts, Marka V1R15 rears Motor-Stock Batteries-Carreras 850s Front Springs-Kyosho Stock T-Plate-Kyosho FRP 0.6H Motor Mount-Stock MM Dampener (If applicable)-None Dampener Fluid (If applicable)-K 15k grease on top shock Gearing-Stock Gear Diff/7T pinion Notes-I was only able to get about 10 tries in this month and my consistency was only 93.8% on this layout because bad laps seem to be more costly. Could probably find a couple of more seconds if I kept at it, but ran out of month. https://cimg5.ibsrv.net/gimg/www.rct...5715143327.png https://cimg6.ibsrv.net/gimg/www.rct...14f5b22ec.jpeg |
September 2025 Porsche Cup
Class-Porsche Cup Class
Date-9/7/2025 Location-Winston-Salem, NC Race Time-293.467 Fastest Lap-3.746 Chassis-MR-03 EVO Body-911 GT3 Wheelbase-90mm Tires-PN KS Soft on PN 19mm +0.5 fronts, Marka v1R10 on PN 19mm W0 rears (not pictured) Motor-ATM 3500 Batteries-Amazon Basics 800s Front Springs-Kyosho Stock T-Plate-GT55 +0.6 FRP #4 Motor Mount-Nexx Round RM Dampener (If applicable)-PN G10 DDS and Kyosho Inner Tube Shock MZW442 Dampener Fluid (If applicable)-1300 Silicone Oil Gearing-PN 64p 13/53 Ball diff Notes-This car is super quick and fun, but a challenge to drive consistently. I only had three tries this month, but this was a pretty good run at 95.40% consistency. https://cimg0.ibsrv.net/gimg/www.rct...387b2585e0.png https://cimg6.ibsrv.net/gimg/www.rct...dbc0f8e45.jpeg |
| All times are GMT -7. It is currently 11:39 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.