Box Stock
 

Class: Box Stock
Date: SEPT 2024
Location: Sydney, Australia
Race Time: 359.6
Fastest Lap: 4.18
Chassis: MR-03 MM
Body: Jomurema GT01
Wheelbase: 98mm
Tires: Kyosho Radials 30F/20R
Gearing: 7T
Batteries: PN racing 750
Front Springs: Kyosho Yellow
T-Plate: PN Racing #2
Motor Mount: Stock
Dampener (If applicable): none
Dampener Fluid (If applicable): none
Diff: Stock
Motor: Stock
Notes: still a newbie and won't allow me to post photos yet.

Hey guys, Traveler that Yaris looks Awesome, a track over in Holland had a race recently with pirus bodyies, looked like fun.

Keep it up guys y’all are crazy fast
Later Walt

Class-box stock
Date-09-31-2024
Location- deux-montagnes quebec canada
Race Time- 409 sec.
Fastest Lap- 4.449
Chassis- mr-03
Body- corvette audi r8 lms
Wheelbase- 98mm
Tires- rear marka slick 15 front pn low profile medium
Motor- kyosho stock
Batteries- gen ace 700mah
Front Springs- yellow
T-Plate- fiber 5s
Motor Mount- mm
Dampener (If applicable)-yellow
Dampener Fluid (If applicable)-
Gearing- 7t / stock diff
Notes- see photos on Facebook group because I can't post yet.

Class-stock
Date-09-31-2024
Location- deux-montagnes quebec canada
Race Time- 380
Fastest Lap- 4.301
Chassis- mr-04
Body- nissan nsx
Wheelbase- 98mm
Tires- rear marka slick 15 front pn low profile medium
Motor- kyosho stock
Batteries- gen ace 700mah
Front Springs- yellow
T-Plate- fiber 5s
Motor Mount- mm
Dampener (If applicable)- red
Dampener Fluid (If applicable)-
Gearing- 8t / stock diff
Notes- see photos on Facebook group because I can't post yet.

Thanks Walt! The Prius is a narrow 98mm wheelbase body, like the Subaru WRX Sti (MZN185) and the Honda Civic Type-R, so it would be a very different feel but would love to see a class of those 98mm Narrow bodies racing against each other.

chjosi, I have wanted to try the flanged rims on my MX-5, but I run my bodies low so I barely can fit normal rims. As yours is pictured you could run it in MX-5, Narrow, and BoxStock!

Berat, wheels are open in the MX-5 class, there are a few full size MX-5s near me that run at the local road courses, and they are BAD A$$! One guy fires his up and runs it down the street late at night, it screams!:sneaky:

Traveler2, body specific classes are GREAT! I like how it really makes it about the driver since everyone is running the same wheel base and track, and the body reacts the same for all. The Porsche class is great, but some are on wide front ends while others narrow, so not quite equal. Kyosho ran some races where they ran 94mm Skylines and Supras that looked fun. They are 94mm narrow bodies that are still in production, so that would be a fun class too! I have a R-33 Skyline and it drives very well!

Awesome to see all the Countries represented the last few months of the challenge!!! Keep on Driving Guys!

Drew, Berat is who got me into MiniZ’s :lol: and who picked up the track ( I’ll be buying it off him as we keep it here and run in my garage)
Later Walt
Pa his Mx5 is nice

September 2024 results
 

2WD Open:

Date- 24 September 2024
Location- Switzerland
Race Time-4m23.53

Fastest Lap-3.21s
Chassis- Vitamin Z 3D print concept 😉
Body- Mazda 787
Wheelbase- 93mm
Rear Marka-V105RR
Front PN Low Profile Super Softs
Motor and ESC 2500kv GL and HW v1.2
https://cimg9.ibsrv.net/gimg/www.rct...7da9898892.jpg
https://cimg1.ibsrv.net/gimg/www.rct...d327c103ab.jpg
https://cimg2.ibsrv.net/gimg/www.rct...bde57cc2e0.jpg
https://cimg6.ibsrv.net/gimg/www.rct...fb3284701a.jpg

Show us the car.

Box Stock
Date-09/30/2024
Location- Sydney
Race Time- 5:41.932
Fastest Lap- 4.144
Chassis- MR03
Body- Jomurema
Wheelbase- 99mm
Wheels/Tires:8.5mm Marka 20 / 14mm Marka 10
Motor- Stock
Batteries- SpeedHouse 800
Front Springs- Stock
T-Plate- 5mm frp
Motor Mount- Stock
Dampener (If applicable)- none
Dampener Fluid (If applicable)- none
Gearing- Stock
Note: full throttle 70%
https://cimg5.ibsrv.net/gimg/www.rct...174b0ae75.jpeg

Stock
Date-09/30/2024
Location- Sydney
Race Time- 5:22.571
Fastest Lap- 3.945
Chassis- MR04
Body- Jomurema
Wheelbase- 99mm
Wheels/Tires:8.5mm Marka 20 / 11mm Marka 10
Motor-TP 3500kv
Batteries- SpeedHouse 800
Front Springs- Stock
T-Plate- 5mm frp
Motor Mount- PN Racing
Dampener (If applicable)- PM Racing
Dampener Fluid (If applicable)- none
Gearing- Stock
Note: full throttle 54% and front tyres cut

https://cimg6.ibsrv.net/gimg/www.rct...8056b167e.jpeg

2wd open
Date-09/30/2024
Location- Sydney
Race Time- 5:25.006
Fastest Lap- 3.996
Chassis- GL GTR
Body- Jomurema
Wheelbase- 98mm
Wheels/Tires:8.5mm Marka 20 / 11mm Marka 10
Motor- TP 3500kv
Batteries- GL Lipo
Front Springs- Stock
T-Plate-
Motor Mount- Stock
Dampener (If applicable)- none
Dampener Fluid (If applicable)- none
Gearing- Stock
Note: full throttle 50% front tyres cut

https://cimg1.ibsrv.net/gimg/www.rct...205c05365.jpeg

Traveler2, How did Yall come out after Helene? I thought of Yall when I heard that NC was in the path! Everything I read said Winston-Salem mostly got wind damage and heavy rain, but no bad flooding. Our thoughts and prayers go to all those impacted!!!

Sorry about this being off topic, but I just wanted to check on a fellow Mini96WC Driver/previous Challenge Moderator!
Take Care Everyone!!! Drew

Hey Folks, Traveller I hope you and yours are safe and sound.
Question are we running this setup counterclockwise this month??

I've barely driven my MX-5 this year due to other projects. Walt knows that I have an unhealthy addiction with 1990s shitboxes :sweat:
My MX-5 class question was not only about the wheels: I love to tinker around with CAD Models, 3D printing and stuff. I could try to build a custom narrow chassis with whatever I have laying around.
But with my backlog of projects that would probably take me a few months to pull off. And I've also found a first gen MX-5 body from Tamiya which would work with pretty much the same offsets and a RM Pod just as the 4th gen MX-5 from Kyosho, but haven't finished fitting it on a Mini-Z Chassis yet.