R/C Tech Forums
Page 16 of 144
« First
6
14
15
16
17
18
26
66
116
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   Tamiya TRF418 (https://www.rctech.net/forum/electric-road/750348-tamiya-trf418.html)

NItrox416 11-27-2013 02:01 PM
Originally Posted by kentech (Post 12763215)
Where exactly did you read that? In some translated Tamiya info it says "suspension arms of same dimensions". But I would not read into that that the length is exactly the same. I don't have the car yet so I cannot check lengths.
Ok I hope that someone that have already the car would do this check for us.
thank you

JoeyE 11-27-2013 05:26 PM
Originally Posted by CraigM (Post 12760848)
Hey Martin! Man I would love to but I think probably not next year :cry:
Go race TITC instead. It's at Surikarns new track. Plus it's a closer flight for you. I'll be there in late March though.

asuradahk001 11-28-2013 08:21 PM
anyone know how long is the rear belt?
THANKS!

kentech 11-29-2013 07:42 AM
Originally Posted by NItrox416 (Post 12763679)
Ok I hope that someone that have already the car would do this check for us.
thank you
Just got the car, had a quick check and the arms both front and rear appears to be the same length as the short rev. arms used on the 417.

Originally Posted by asuradahk001 (Post 12767218)
anyone know how long is the rear belt?
THANKS!
Rear belt is 189mm, or 63t.

Qatmix 11-29-2013 08:19 AM
Erm, where did you get it from in europe? Did it come with the extra arms etc?

Cheers

joech 11-29-2013 12:15 PM
I got the cars as well. :nod:

Anyone know what plastic from the 417 will work on the 418? Just don't want to unload my 417s with the parts that I can use on the new cars.

Big Dave 1984 11-29-2013 01:00 PM
So where are you getting these cars ?

Juan Aveytia 11-29-2013 01:09 PM
Originally Posted by joech (Post 12768606)
I got the cars as well. :nod:

Anyone know what plastic from the 417 will work on the 418? Just don't want to unload my 417s with the parts that I can use on the new cars.
If your talking about suspension parts. The suspension set up from the 417 will fit without any problems. But I have no idea if the 417 and 418 parts are interchangeable

joech 11-29-2013 01:15 PM
1 Attachment(s)
Originally Posted by Big Dave 1984 (Post 12768702)
So where are you getting these cars ?
LHS pre ordered them from Borgfeldt Canada ( Exclusive Canada distributor for Tamiya)

Gordie88 11-30-2013 12:20 AM
This was my first kit..

https://scontent-a-lga.xx.fbcdn.net/...74596990_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...21028417_n.jpg

https://scontent-b-lga.xx.fbcdn.net/...07395076_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.n...71050282_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.n...63453319_n.jpg

https://scontent-a-lga.xx.fbcdn.net/...37714631_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.n...93098113_n.jpg

Burlap 11-30-2013 04:10 AM
Gordie, what size screw does Tamiya use to hold the centre pulley to the bulkheads?

JoeyE 11-30-2013 09:04 PM
When do you think the spare parts will go on sale? Arms, steering hubs, and C hubs. Want to try it on my 417.

Gordie88 11-30-2013 09:38 PM
2.6x8mm

CraigM 12-01-2013 01:39 AM
Marc just won the BIRC at Huge RC in Thailand with the 418 :)

kentech 12-01-2013 02:59 AM
Originally Posted by JoeyE (Post 12772009)
When do you think the spare parts will go on sale? Arms, steering hubs, and C hubs. Want to try it on my 417.
This month.

I posted the parts list and the listing with pictures at the end of the manual - http://kentech.blogs.se/


All times are GMT -7. It is currently 11:58 AM.
Page 16 of 144
« First
6
14
15
16
17
18
26
66
116
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.