3 Racing Sakura XI Sport
#122
Sakura XI Sport spare & hopup parts are in stock now.
http://www.tqrcracing.com/shop/produ...id=56&s_sort=3
FYI, thanks.
http://www.tqrcracing.com/shop/produ...id=56&s_sort=3
FYI, thanks.
#124
Tech Adept
There is a chassis coming out http://os.3racing.hk/products.php?products_key=6474
Do a google search for set up sheets,there arn't that many yet being a relatively new car.
#125
Tech Adept
Xi sport Setup from 3racing Facebook page
#126
Been reading this forum and debating getting the XI Sport with my Fathers Day cash. Was looking at the Turnigy TD-10 as well but I think I will just bite the bullet and go with the Sakura. Up til now I have been running a HPI Sprint 2 Flux in our Local SSF comp (England Park Raceway, QLD)
I will be replacing the HPI with the Sakura and hope to be able to upgrade the XI Sport with parts from the Ultimate to bring it up to Ultimate Specs eventually. I will be running it with the 10.5 T trackstar and hope it will improve my lap times and count.
Anyone know of good deals on the Sakura?
I will be replacing the HPI with the Sakura and hope to be able to upgrade the XI Sport with parts from the Ultimate to bring it up to Ultimate Specs eventually. I will be running it with the 10.5 T trackstar and hope it will improve my lap times and count.
Anyone know of good deals on the Sakura?
#127
Tech Adept
Not sure about QLD. I got mine at Feral batteries Sydney. Rcmart have them pretty cheap if you need other stuff to fill up the freight.
#128
Tech Apprentice
I have just brought a Xi Sport, almost finished building it. I notice the Xi Sports has no sway bars, what parts would I need to add sway bars front and back? Does part SAK-U316 have all the parts?
What other parts should I be looking at replacing / adding?
Ric
What other parts should I be looking at replacing / adding?
Ric
#129
Tech Apprentice
iTrader: (1)
. I don't think the ultimate chassis will be a direct fit.
There is a chassis coming out http://os.3racing.hk/products.php?products_key=6474
Do a google search for set up sheets,there arn't that many yet being a relatively new car.
There is a chassis coming out http://os.3racing.hk/products.php?products_key=6474
Do a google search for set up sheets,there arn't that many yet being a relatively new car.
THANKS Yogi!!!!!!
#131
BELT "FLUTTERING"/MAKING NOISE TURNING.
Is anyone having issues with their belt "fluttering"(making noise) or getting louder when you turn the wheels right or left about 40 degrees and above?
I just noticed this today and being a novice dont really have an idea why this is happening or if it is normal. My theory is because the wheels are connected to the front portion where the belt is connected and that this "warps" the angle the belt is making contact, just a theory.... I can notice the "flutter" from the bottom side view under the steering column, as far as I can see there is no rubbing and it only happens when I turn my wheel left/right.
The sound almost sounds like a playing card in a bike spoke if that helps describe it better.
I just noticed this today and being a novice dont really have an idea why this is happening or if it is normal. My theory is because the wheels are connected to the front portion where the belt is connected and that this "warps" the angle the belt is making contact, just a theory.... I can notice the "flutter" from the bottom side view under the steering column, as far as I can see there is no rubbing and it only happens when I turn my wheel left/right.
The sound almost sounds like a playing card in a bike spoke if that helps describe it better.
#132
Tech Adept
This isn't normal that I can tell. It should be smooth and quiet. Do you have the 1 piece or 2 piece front-rear suspension mount. Maybe your belts to loose. Or the out drives in the spool arnt in the right spot,this could throw it out of balance ? Has it done it form the beginning.
#133
This isn't normal that I can tell. It should be smooth and quiet. Do you have the 1 piece or 2 piece front-rear suspension mount. Maybe your belts to loose. Or the out drives in the spool arnt in the right spot,this could throw it out of balance ? Has it done it form the beginning.
Ill do some more inspecting, any other ideas?
#134
Tech Rookie
Been reading this forum and debating getting the XI Sport with my Fathers Day cash. Was looking at the Turnigy TD-10 as well but I think I will just bite the bullet and go with the Sakura. Up til now I have been running a HPI Sprint 2 Flux in our Local SSF comp (England Park Raceway, QLD)
I will be replacing the HPI with the Sakura and hope to be able to upgrade the XI Sport with parts from the Ultimate to bring it up to Ultimate Specs eventually. I will be running it with the 10.5 T trackstar and hope it will improve my lap times and count.
Anyone know of good deals on the Sakura?
I will be replacing the HPI with the Sakura and hope to be able to upgrade the XI Sport with parts from the Ultimate to bring it up to Ultimate Specs eventually. I will be running it with the 10.5 T trackstar and hope it will improve my lap times and count.
Anyone know of good deals on the Sakura?