Tuf

Weird I use only 5mm wheel adapters, no room for wider or any spacer if I want a full lock.

DrFelter

iTrader: (3)

spring71

iTrader: (3)

3Racing Sakura Advance S 1/10 Touring Car kit just arrived today.

https://www.tqrcracing.com/shop/product_view.asp?p_id=15178

FYI, Thanks.

moparSRT

Looks like it mounts exactly the same way as the XI unlike the mount from the ultimate 2014 so chances are it might fit BUT I never had a ultimate so cant be 100% sure.

http://www.3racing.hk/manuals/SAK-U117-Manual.jpg

TeamThibault

moparsrt can you post your setup for black carpet for ultimate 2014

moparSRT

Its set up for VTA

35 wt ae oil front and back / green front, black rear
5mm ride height
2mm droop over rideheight
5k ae rear diff
1.5* camber rear
0.5* toe in rear
1.5* camber front
0.5* toe out front
stock shock position and camber links front and rear, stock sway bars
front sidewalls glued

Tuf

Have you guys a trick to take off the bearings from front knuckles?

A blind 1/8 pancar has cut my XI sport...

Moreirinha

Just push them out with a big hex tool, carefully go around forcing the bearing out. Should pop off.

Tuf

It's what I do for other bearings but I can't for the knuckles and rear hubs, cause there's a divider in the middle of the knuckle between the 2 bearings.

I can't find a way to take them off without damages.

spring71

iTrader: (3)

3Racing Sakura Advance S spare parts are arrived today.

https://www.tqrcracing.com/shop/prod...?s_maker_id=56



FYI, Thanks.

Waltrip55

I ran my XI NU in 17.5 over the weekend in southern Florida on a medium sized outdoor asphalt track. I ended up qualifying 3rd, missing TQ by 7 tenths, out of 16-17 cars. Raced well and finished a few seconds back in second, matching lap times to cars that cost as much as my entire car with electronics (all budget electronics and battery on board). I'm still running the car stock with Tamiya springs only. Also ran the same car in December at a small outdoor asphalt track getting the TQ and finishing second, however, there were only 5-6 cars that day at that track. This car continues to impress and I will likely move over to the new 3racing sport chassis once I wear this one out (I still have another one in the box for spares, never breaks!).

moparSRT

Just finished building the new Advance S, very excited to see most of the mods I have been doing to the XI are now standard with the S Built and set up the S for my new VTA asphalt car, will continue running the XI on monday nights at quaker oval and use the S for on road.
The build went easily just like the XI except the screws included wit the S are top notch unlike the ones included with the XI. First run this weekend at Florida State Race #5 in Coral Springs ... very impressed with the package 3racing put together without increasing the price of the original XI

Waltrip55

Looks great, I'll see you on Sunday at the State Race...I'll be running 17.5 with the XI.

moparSRT

Not a bad way to finish the 2019 season @ Valkaria Raceway with the XI Sport

moparSRT

Had some fun social distancing last night with the xi, this might be it for a while if we go on lock down