Team CRC Xti 1/12th Scale!!
|
|||
#766
Tech Regular
#770
Tech Regular
#771
Tech Champion
white lube - 3000wt
blue lube - 10000wt
Source: https://www.teamcrc.com/crc/modules....653&highlight=
#772
ko servo 994
Hello
plse someone know if KO 949 fit on Xti?
Thanks
plse someone know if KO 949 fit on Xti?
Thanks
Last edited by corally; 12-12-2012 at 08:06 AM.
#773
This is my first 1/12 so go easy on me. I think CRC built a beautiful car.
#775
Thank you much! I agree on the shrink. figured I'd remove all but at least one. And see if i could notice it. I put multiple on because you can always remove them after you solder, and I wanted a picture of the car "new" before I hit the wall 1,567 times this month.
#778
#779
Tech Adept
From memory, the KO 947/949 servos are a similar size to the Futaba 9650. In that case then yes, it will fit the Xti but you'll need to cut the RH lug off it to fit it between the front suspension. The servo will be secured using a post on one side and d/s tape.
#780
Tech Champion
iTrader: (34)