Hot Bodies Cyclone
Well im bound to say No to being hit on the side, and having them broke, as its me that designs and makes the Cool Can Fans, but honestly, in the 3 years ive used them, I have broken 1 CCF bracket and 2, fans, and considering I designed the first one off a Losi XXX-S thats some time ago now, since then I have had the JRX-S the Type-R and now the WCE and TC.
Malc THECANMAN
By the way, the body is painted by a good friend of mine, Dave Saul of Slick Graphics
Tech Elite
iTrader: (28)
sweet. Someone else who uses a PTX.
we have almost the same layout in our cyclone tc except for your fans (hehe i don't have that) and wiring and atc posts. my wires are underneath the capacitor. did you cut your servo and esc wires?
Finished rebuilding the car today after completely tearing it down to sand and seal the chassis. Its a pain wiring the car using the speed passion ESC due to the position of the solder tabs but it works.
Just wondering what is holding your servo in place. It seems that you have done away with the servo mount and is able to place the receiver in place. I have the same electronic like you, but I never can place the futaba receiver anyway apart from on top of the servo.
I use Shoe Goo to hold it in
I just glued it in, let it dry for a day or 2 and its perfect. I have had no problems with mounting this way, but you have to let the glue dry for atleast 24 hours IMO. But I still have yet to have it pop off, and I know of a few other local racers who do this, for stock, 19T, and MOD.
I just glued it in, let it dry for a day or 2 and its perfect. I have had no problems with mounting this way, but you have to let the glue dry for atleast 24 hours IMO. But I still have yet to have it pop off, and I know of a few other local racers who do this, for stock, 19T, and MOD.
Tech Elite
iTrader: (30)
I'll be at speedworld tomorrow testing for the speedworld cup so if you're local come on out. For the Reedy race I didn't have any foams in the shocks and the car worked great. If time allows I may put the o-rings in after a pack or two. I haven't used the RP insert in anything other than RP's but you know me....I'll try it out and see how I like it. So far I really like the purple Hara firm insert in Sorex 36's.
Tech Champion
iTrader: (32)
Tech Champion
iTrader: (32)
BlackedOutREVO,
Just wondering what is holding your servo in place. It seems that you have done away with the servo mount and is able to place the receiver in place. I have the same electronic like you, but I never can place the futaba receiver anyway apart from on top of the servo.
Just wondering what is holding your servo in place. It seems that you have done away with the servo mount and is able to place the receiver in place. I have the same electronic like you, but I never can place the futaba receiver anyway apart from on top of the servo.
Well your NOT supposed to hit the boards at the END of the straight! That usually causes bad stuff
All joking aside, do you have a spare graphite middle deck? I want to try one out, but I dont have one
All joking aside, do you have a spare graphite middle deck? I want to try one out, but I dont have one
Tech Champion
iTrader: (32)
As far as extra plates you would need to ask Scotty or Billy for one. I only have what's on my car.
Tech Elite
iTrader: (30)