Hot Bodies Cyclone
Tech Elite
iTrader: (138)
the one-way pulley is used for both the spool and the one-way. However they use different screws to secure the peice to the pulley!
Tech Champion
iTrader: (100)
Tech Elite
iTrader: (138)
nice nice nice! yeah Im thinking more liek toyz for boyz in new bedford. They do 1/10 electric sedan on their assphalt track, about 100'x50' every saturday at 3pm. $10 entry! they do 10.5 class and open mod (2.5/3.5)
Tech Elite
iTrader: (30)
Gas to Orlando and back = $40
new set of tires = $30
race entry = $15
bench racing on r/c tech = price"less"
Dave,
Seriously, I'll be out of town on Sat. to a wrestling meet for Jeff. So, we'll see what happens by Sunday....but the car is ready with the new diff installed.
new set of tires = $30
race entry = $15
bench racing on r/c tech = price"less"
Dave,
Seriously, I'll be out of town on Sat. to a wrestling meet for Jeff. So, we'll see what happens by Sunday....but the car is ready with the new diff installed.
Tech Champion
iTrader: (32)
The TQ car is done. SCotty didn't help me with my wiring so if I don't TQ then it's his fault
Tech Master
iTrader: (47)
Tech Elite
iTrader: (32)
You running the Reedy spec tire Saturday?
Hopefully I will have the new diff by then. Car has been really good in testing/practice.Hopefully it works @ Speedworld.
TQ? You realize who is actually coming this weekend right?
Hopefully I will have the new diff by then. Car has been really good in testing/practice.Hopefully it works @ Speedworld.
TQ? You realize who is actually coming this weekend right?
Tech Elite
iTrader: (28)
so my front outdrives and CVDs are getting beaten and flattened and wearing down, any easy way to prolong them or anything? Theres already a fair amount of play because of the gap that's formed because of the wear...
CVD blades did not work, they were too thick to fit correctly.
CVD blades did not work, they were too thick to fit correctly.
Tech Champion
iTrader: (32)
Billy has the new diff in stock.
Do they realize who the hell I am????
Tech Champion
iTrader: (32)
Tech Elite
iTrader: (138)
so my front outdrives and CVDs are getting beaten and flattened and wearing down, any easy way to prolong them or anything? Theres already a fair amount of play because of the gap that's formed because of the wear...
CVD blades did not work, they were too thick to fit correctly.
CVD blades did not work, they were too thick to fit correctly.
Tech Elite
iTrader: (28)
The CVD's are being beaten? you mean there bending? The blade is used to save the outdrive/cup on the ball diff. However on the front of the car, the one-way/spool does not accept blades so you have to continuosly replace the outdrives/cups on the one-way/spool when they wear grooves or "pockets" in the cup where the pin on the CVD meets it.
Tech Elite
iTrader: (32)
$5-8 if your running the ver.3 spool