Hot Bodies Cyclone
Tech Elite
iTrader: (138)
i just got my hands on a used moorespeed cyclone. i'm wondering what the main priorities are for backup parts, i'd like to get part numbers for these from the seasoned cyclone racers
i'd also like to get the part number of the new team diff kit that has come out? also, is there a dust cover for the rear diff?
cheers
i'd also like to get the part number of the new team diff kit that has come out? also, is there a dust cover for the rear diff?
cheers
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
I bend so many Ti-coated hinge pins, probably two every month. Also if you use the graphite c-hubs and steering knuckles, stock up on those of course. Stock up on Pro 4 arms, but now there releasing new stronger arms for the same price but there not out yet and they will most likely be hard to find.
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Tech Elite
iTrader: (30)
Tech Elite
iTrader: (30)
Never mind, I found it, thanks!
I bend so many Ti-coated hinge pins, probably two every month. Also if you use the graphite c-hubs and steering knuckles, stock up on those of course. Stock up on Pro 4 arms, but now there releasing new stronger arms for the same price but there not out yet and they will most likely be hard to find.
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Honestly, how do you bend the hinge pins every few runs? I think I crash alot, and after one race season I have one bent.... So dang!!!
Servo saver/horn, IDK how you pull that off
CVD's, I run a spool and I havent broken one yet
Ball cups, still on original set
Everything else has broken. but not alot
Tech Champion
iTrader: (32)
I love my car. I love my car. I love my car.
racenut- How much did you shave to fit the SMC 5000???
racenut- How much did you shave to fit the SMC 5000???
Tech Elite
iTrader: (76)
I bend so many Ti-coated hinge pins, probably two every month. Also if you use the graphite c-hubs and steering knuckles, stock up on those of course. Stock up on Pro 4 arms, but now there releasing new stronger arms for the same price but there not out yet and they will most likely be hard to find.
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Tech Fanatic
iTrader: (1)
Tech Elite
iTrader: (32)
Tech Elite
iTrader: (76)
Tech Elite
iTrader: (76)
Tech Champion
iTrader: (10)
I bend so many Ti-coated hinge pins, probably two every month. Also if you use the graphite c-hubs and steering knuckles, stock up on those of course. Stock up on Pro 4 arms, but now there releasing new stronger arms for the same price but there not out yet and they will most likely be hard to find.
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups
Get all your stuff from rcmarket, hes so awsome and has the best selection of cyclone parts.
If your curious heres a complete list of parts i broke or bent on my moorespeed:
-Ti-coated hinge pins
-Graphite c-hubs
-Graphite steering knuckles
-Graphite arms
-Alloy c-hubs
-Servo saver
-CVD's
-bulkhead
-servo horn
-wheels
-outdrives
-CVD blades
-ball cups