Hugo

iTrader: (1)

Ok thanks for the info.

HELLOkitty

why are replacement parts are hard to find?

HKRCMODEL

Hi all :
long time no see !
i'm b4 said new bulkhead today arrive ,
stronger than Shxxxxx
& cheaper price
http://shopping.rcmodel.hk/product_i...9f51c30076e9e3

omoser

maybe, I'll report if the Shooters bend as easily as the stock ones.

regards

danjoy25

iTrader: (38)

Ran the car twice in our local indoor track and all I can say is WOW Just wish there's a big meet soon as I will definitely be in the running.

ngo8

the car is definitly fast on carpet its ureal i love mine

Rick Draper

Are you running rubbers on carpet? If so can you post your setup please.

danjoy25

iTrader: (38)

Does anyone have the part # of the steel driveshaft for the front and which shop sells them?

nordheim

iTrader: (6)

Can anyone post a good setup for high traction asphalt with a stock motor? I have been running the box setup the last few days and the tailend seems very loose. I also have the spool in it.

ngo8

no foams if you a carpet rubber there is haras setup from vegas i used his foam set up but i tweaked it to my likeing but there a good start .

Rick Draper

Tried that the car was terrible. That one is for a urba high grip track which the track i use aint.

pucho

I started with the stock set up and made somw changes, I am using ASS gold spring on the front, ASS silvers in the rear, added 1/2deg of camger in the rear, added droop to the front (from 7 to 5 on the gauge) added 1mm under rear upper ball end, and used the 1.2 mm swaybar. that seamed to do it for me. I am running with diffs and a looked center pully. The next thing I and going to try is rasing the front pivot blocks and playing around with the roll center maybe eaven some anti dive. Hope this helps.

Luis

Andrew_Carter

The car is pretty much there or there abouts on rubbers indoors Rick,i ran kit setup all but the front shock mounting and shock setup,3 hole pistons,60w oil.Lean front shocks in 1 hole to give abit more mid corner and that was it,Im running Ride TSX Acord with a Yoke GW 3.1 wing. Car feals pretty good.

Your best bet is starting with kit anmd finding somthing YOU can drive,whats fast for the likes of Moore and Hara mite be shocking for you.

L8rs!

pro4_chris

i ran the car on carpet with foams and used hara's set up apart from 1 spring rate less front and back and the car is awsome

danjoy25

iTrader: (38)

Any setup tips using foams on asphalt track (high traction) using front & centre oneways?