racer034life

iTrader: (1)

The new car is the Xti-wc. The Xi is some what out dated for classes like mod. But at my local track 17.5 or 21.5 the car works really good and is easy to drive. It will soon become my back-up car

jannedwr

Ok, ill search for the xti thread then! Did´nt fint it last time!

yxiaocheng

iTrader: (18)

I know it sounds silly but I have trouble mounting batteries. I have to take out the center shock stand every time every time I change battery. How to do it properly?

WIITA

iTrader: (43)

I normally just pop the center shock off from the top plate side then you'll have free reign at the battery to change it out.

tdu verney

I have bought 3 Super light Left Clamp Hub's #3333. Two never tightend up and the third just push through the threads, wtf? Not new to 1/12. Anyone else having this issue?

Still Bill

iTrader: (16)

I have no experience with the superlight hubs. But, I always use a longer screw than what comes with the hubs to utilize as many threads as possible.

Send an e-mail to John at CRC to describe the issue. He is there M-F.

[email protected]

Bill

Tstang429

iTrader: (5)

Anyone happen to maybe still have the manual for this car.

rpoage

iTrader: (2)

I have the manual in PDF. I can't seem to upload it to the board as it may be too big a file.
Email me at [email protected] and use CRC_GENXti_manual in the subject and I will email it to you .

Tstang429

iTrader: (5)

Imr really trying to save this car. in my pile of parts are three shocks. does anyone have the length this cars shock is supposed to be? there all blue so i assume there associateds lengths so not sure there right.

ando88

iTrader: (1)

Hello, I bought recently 3 CRC Pancar. I never had a CRC car.
Which 3/16" nut driver do you use for the ball stud?
Because the one I use scratch all the ball (the nut drive inside is narrower) and I need to buy a new one.

Friulimotosport

MIP