Ta04r...
#1051
Enduro!!
I used mine in a sort of enduro race, first to reach 200 laps, each team is composed of 2 car, 2 drivers, I used my 04-4 and my partner used an mr4tc-sp
Its a great for that kind of race for the folowing reasons:
1. Its indestructable! (my partner clipped a corner and broke arms) that happened 2 times. If I clip a corner nothing happens!!
2. Its failry light
tips: change your belts to new ones before the race, and also check your ball cups, if allowed enlarge the underside of the chassis where the motor sits so more air flow. and do not use the battery strap, just tape the battery, its faster that way.
We finished 4th, because my partner broke his car 2 times.
use a 12-15 turn motor.
Its a great for that kind of race for the folowing reasons:
1. Its indestructable! (my partner clipped a corner and broke arms) that happened 2 times. If I clip a corner nothing happens!!
2. Its failry light
tips: change your belts to new ones before the race, and also check your ball cups, if allowed enlarge the underside of the chassis where the motor sits so more air flow. and do not use the battery strap, just tape the battery, its faster that way.
We finished 4th, because my partner broke his car 2 times.
use a 12-15 turn motor.
#1052
TCS teching...
Has anyone here had any experience at a TCS race? I do understand that you must (for the most part) use Tamiya parts but can anyone describe the teching process that they go through? They don't make you tear down your car, do they?
#1054
Has anyone heard of a new TA04 TRF kit?
I heard a rumour that it was being show at the Nuremburg (sic?) Hobby Show?
One of the changes is incorporation of alloy suspension mounts so you can change roll centre a-la 414.
Anyone have any info... pics... ?
I heard a rumour that it was being show at the Nuremburg (sic?) Hobby Show?
One of the changes is incorporation of alloy suspension mounts so you can change roll centre a-la 414.
Anyone have any info... pics... ?
#1055
change centre roll...hmmm...ta04 trf...
no idea abt such a kits,but check out tamiya website frequently,they updated saying they will update pics of their new products at the end of the month...
no idea abt such a kits,but check out tamiya website frequently,they updated saying they will update pics of their new products at the end of the month...
#1056
Aluminum mounts ey, why don't they make Tamiya aluminum knuckle arms first!!!!!
#1057
#1058
QUESTION??
Hello!! Can I use the Aluminum Hinge Pin Mounts on the TRF414M2 on the TAO4-R??
Or can I just Place spacers where the hinge pin mounts are screwed so I could lower the car a bit more?
Has any body tried this?? Thanks!
Lem
Or can I just Place spacers where the hinge pin mounts are screwed so I could lower the car a bit more?
Has any body tried this?? Thanks!
Lem
#1059
Question 2????
Has anybody used the .6 module for the TA04-R???
what pinion can i use for a mod motor??
seems like i need to use a bigger pinion to reach the 83t spur.
what will I do? Thanks
what pinion can i use for a mod motor??
seems like i need to use a bigger pinion to reach the 83t spur.
what will I do? Thanks
#1060
Regional Moderator
Re: Question 2????
Originally posted by lem2
Has anybody used the .6 module for the TA04-R???
what pinion can i use for a mod motor??
seems like i need to use a bigger pinion to reach the 83t spur.
what will I do? Thanks
Has anybody used the .6 module for the TA04-R???
what pinion can i use for a mod motor??
seems like i need to use a bigger pinion to reach the 83t spur.
what will I do? Thanks
#1061
Re: Question 2????
Originally posted by lem2
seems like i need to use a bigger pinion to reach the 83t spur.
what will I do? Thanks
seems like i need to use a bigger pinion to reach the 83t spur.
what will I do? Thanks
You don't want to overgear a mod by using a 83t spur and too big of a pinion.
#1062
Tech Master
iTrader: (28)
NEW TA04 TRF
taken from the german toy fair press releases:
"Tamiya has done the impossible by taking the top-performance TA04-R to an even higher level. Adding an all-new front one-way to the existing center one-way, this chassis realizes even higher drive efficiency. Suspension areas have been "suped-up" with fluorine-coated TRF dampers and suspension blocks. "
http://groups.yahoo.com/group/tamiyatrf/
NICE!!!
"Tamiya has done the impossible by taking the top-performance TA04-R to an even higher level. Adding an all-new front one-way to the existing center one-way, this chassis realizes even higher drive efficiency. Suspension areas have been "suped-up" with fluorine-coated TRF dampers and suspension blocks. "
http://groups.yahoo.com/group/tamiyatrf/
NICE!!!
#1063
Tech Fanatic
Yes, new '04R is sweet. Silvery graphite, new sway bar mounts, blue aluminum arm mounts.
OOOH, AHHH, my wallet says, NAAAH
OOOH, AHHH, my wallet says, NAAAH
#1064
Re: NEW TA04 TRF
from the german toy fair press releases:
... have been "suped-up" with .....
... have been "suped-up" with .....
"suped-up" is ghetto speak.
#1065
while I agree with Madjack that it does look very nice, I see exactly what Iso Octane is talking about. It's all about marketing.
I love Tamiya and I love my TA04, but come on!! Tamiya has already milked the TA04 for all it's worth, with this new TRF version it makes 7!! Count them seven different versions,
-The original TA04
-TA04S
-TA04pro
-TA04pro(blue edition)
-TA04R
-TA04SS
-TRF TA04
Are we going to see David, Jimmy or Surikarn race this car competitively, the answer is no. They might race it once or twice
just to create a buzz, and have people get excited about, and dump $350 to $400 bucks for it. But that's about it. The 414M2
has proven itself very competitive, and the up and comer TBEVOIII
is rumored to be even faster, already winning a couple of important events.
So as much as it may suck, we're not going to read headlines about one of Tamiya's top drivers taking a world championship with this car. The only purpose for releasing a car like this is to make $$$$$.
I know many will disagree, but come on, think about it.
I love Tamiya and I love my TA04, but come on!! Tamiya has already milked the TA04 for all it's worth, with this new TRF version it makes 7!! Count them seven different versions,
-The original TA04
-TA04S
-TA04pro
-TA04pro(blue edition)
-TA04R
-TA04SS
-TRF TA04
Are we going to see David, Jimmy or Surikarn race this car competitively, the answer is no. They might race it once or twice
just to create a buzz, and have people get excited about, and dump $350 to $400 bucks for it. But that's about it. The 414M2
has proven itself very competitive, and the up and comer TBEVOIII
is rumored to be even faster, already winning a couple of important events.
So as much as it may suck, we're not going to read headlines about one of Tamiya's top drivers taking a world championship with this car. The only purpose for releasing a car like this is to make $$$$$.
I know many will disagree, but come on, think about it.