Trinity Reflex 12 Forum
#47
Tech Elite
iTrader: (75)
I said I would post some pics of the new CEFX rear dampner tubes on the car, and I finally got the camera charged back up.
Again, they were a perfect fit, and only need a 4-40 ball on the inside link mount to be a direct swap. The feel is far better than the stock drinking straws, and can hold a much firmer lube than the stock pieces.
Again, they were a perfect fit, and only need a 4-40 ball on the inside link mount to be a direct swap. The feel is far better than the stock drinking straws, and can hold a much firmer lube than the stock pieces.
Last edited by squarehead; 11-29-2010 at 02:55 PM.
#48
Tech Rookie
This is my car.
#51
Tech Champion
Are you rebuilding an old car or looking to build something new?
If something new and you want that front end look at the Speed Merchant...the front end is almost the same. If your just looking for an interesting front end look at the BMI. As for the damper tubes many of the modern brands use a damper tube system: BMI, CRC, Speed Merchant, IRS, and many others I have forgotten to include.
If something new and you want that front end look at the Speed Merchant...the front end is almost the same. If your just looking for an interesting front end look at the BMI. As for the damper tubes many of the modern brands use a damper tube system: BMI, CRC, Speed Merchant, IRS, and many others I have forgotten to include.