3 racing new F1
#1487
Watch the Super Bowl!
#1488
Hey Guys, you can now register for Formula One Racing at the 2012 ROAR Carpet Nationals. The web page to get registered is:
http://www.roarracing.com/.../Electric_On_Road_Carpet_Nationals
http://www.roarracing.com/.../Electric_On_Road_Carpet_Nationals
#1489
#1491
Sorry, texastc, I wasn't putting you down. I think there were not too many races yesterday, maybe Troy was testing new parts.
That sounds promising! I thought that Mike wasn't planning to do a chassis for the FGX. Wow, three top designers will be offering after markets parts for the FGX. The future really is getting brighter.
That sounds promising! I thought that Mike wasn't planning to do a chassis for the FGX. Wow, three top designers will be offering after markets parts for the FGX. The future really is getting brighter.
#1492
Tech Apprentice
Ran my FGX first time today, first sweeper left turn was ok, inner wheel lifting off. Then a 180degree turn after the straight. Kaboooom, traction rolled in to the wall. Tried 5 more times, happened all the time. So whats next? Stiffen up the rear with swaybar? New springs? I read somewhere, does the CRC 1/10 springs fit? Pain in the *** to order F201 springs since it will take me 30 days + to get it here
#1493
Tech Elite
iTrader: (2)
Ran my FGX first time today, first sweeper left turn was ok, inner wheel lifting off. Then a 180degree turn after the straight. Kaboooom, traction rolled in to the wall. Tried 5 more times, happened all the time. So whats next? Stiffen up the rear with swaybar? New springs? I read somewhere, does the CRC 1/10 springs fit? Pain in the *** to order F201 springs since it will take me 30 days + to get it here
http://uf1series.com/_sub_pages/2012/uf1_101.html
#1494
Tech Master
iTrader: (51)
Ran my FGX first time today, first sweeper left turn was ok, inner wheel lifting off. Then a 180degree turn after the straight. Kaboooom, traction rolled in to the wall. Tried 5 more times, happened all the time. So whats next? Stiffen up the rear with swaybar? New springs? I read somewhere, does the CRC 1/10 springs fit? Pain in the *** to order F201 springs since it will take me 30 days + to get it here
Tires: Shimizu soft ribs front and rear
Front spring: Silver (The lightest in the aftermarket 3racing for the FGX)
Camber: True -.5 to -1 (The stock arms with the -1 block is actually about -3 per side. You need to upgrade your arms to the turnbuckle arms on this thread)
Rear shocks: 80 weight 2 hole with green CRC VCS springs (Springs are a little tight but fit)
Rear anti roll bar: #5
Rear tow: 1 degree block
Rear Camber: -1 to -2 depending on if the rear starts coming around
Gearing: 35 spur with 30 - 32 pinion
The anti roll bar helps a ton with the tire lift and traction rolls. It is still a fine line between having a car with great on/off power steering and having a car that rolls.
Good luck,
Troy
#1495
Tech Apprentice
Thanks, made an order on some springs, lets hope it gets way better. It was a lot of fun on the straights! Can't wait for the summer to come and drive it on some proper asphalt
#1496
Some pix from practice today!
Not sure if i like the upper deck brace or not, seems to take away too much steering on asphalt, didnt have enough time to swap it out and the timer was not on.
Not sure if i like the upper deck brace or not, seems to take away too much steering on asphalt, didnt have enough time to swap it out and the timer was not on.
#1499
Tech Master
Just ordered a second rabbit from f1 paintlab. Brad is absolutely awesome to order from. Had to let you guys know that f1 paintlab is top notch. Very helpful and extremely responsive to e mails. Highly recommended.