Team Losi JRXS
07-28-2006, 10:24 PM
Kinda off-topic, but what's the website for the IIC??
07-28-2006, 11:29 PM
07-29-2006, 06:22 AM
Big thanks to Mike Hanyes for putting a killer set up under my jrxs last night.
that thing was ... smmmmmoooth !
Thanks Buddie
that thing was ... smmmmmoooth !
Thanks Buddie
07-29-2006, 08:32 AM
No prob Don, now you just need to stick with a (this) car.
07-29-2006, 08:42 AM
What size hexes will I need to work on the car? Any suggestions to a set? Thank you. No Hudy either. Someitnhg like EDS or Team Associated will work.
07-29-2006, 08:54 AM
Team Losi sells locking wheel hexes in three sizes; stock, stock+.03, and stock+.06=AE. They're nicely machined!
Edit: .....right, I assumed, and you know what that means. Anyway, Team Losi sells great tools, too! Check out their hex DRIVER sets.
Edit: .....right, I assumed, and you know what that means. Anyway, Team Losi sells great tools, too! Check out their hex DRIVER sets.
07-29-2006, 09:13 AM
I have had the tools since they came out and I have not bent or broken or stripped and tips. They just simply rock!!
The new hexs are fantastic!!! The machining is awesome!!!
Brant
The new hexs are fantastic!!! The machining is awesome!!!
Brant
07-29-2006, 05:01 PM
Originally Posted by POOKYT
Did Kyle Bergstrom's setup from the Reedy race ever get posted up???
07-29-2006, 05:15 PM
I have yet to see it any where. If anybody has it please let us know.
Brant
Brant
07-29-2006, 06:24 PM
I saw it posted either here or jrxs.com and saved it:
Sorry for the not so good quality, J. F. may know where the better version is.
Sorry for the not so good quality, J. F. may know where the better version is.
07-29-2006, 11:03 PM
i raced tonight after about a month and a half break after the nats. i obtained a set of newer material arms at the nats but didn't really hit anything since i drive paranoid when qual points are used. tonight i didn't have to hold back a bit, so i had a few "incidents" involving my car and some 2x4's. i didn't break a single thing, and a few of these hits were hard enough to shear the graphite arms in half.
anyway, thanks for experimenting with new materials Losi, looks like you've found a winner with this new stuff.
anyway, thanks for experimenting with new materials Losi, looks like you've found a winner with this new stuff.
07-30-2006, 07:26 AM
Originally Posted by RussB
i raced tonight after about a month and a half break after the nats. i obtained a set of newer material arms at the nats but didn't really hit anything since i drive paranoid when qual points are used. tonight i didn't have to hold back a bit, so i had a few "incidents" involving my car and some 2x4's. i didn't break a single thing, and a few of these hits were hard enough to shear the graphite arms in half.
anyway, thanks for experimenting with new materials Losi, looks like you've found a winner with this new stuff.
anyway, thanks for experimenting with new materials Losi, looks like you've found a winner with this new stuff.
Where did you get the new arms? I assume you're talking about the EA3 material...
07-30-2006, 09:11 AM
Originally Posted by PitNamedGordie
Where did you get the new arms? I assume you're talking about the EA3 material...
07-30-2006, 10:05 AM
Originally Posted by RussB
i'm pretty sure they're the EA3 material. they're not the graphite composite, much darker in color, and came from a nice guy who drives a red and yellow paint job
07-30-2006, 10:07 AM
Originally Posted by RussB
i raced tonight after about a month and a half break after the nats. i obtained a set of newer material arms at the nats but didn't really hit anything since i drive paranoid when qual points are used. tonight i didn't have to hold back a bit, so i had a few "incidents" involving my car and some 2x4's. i didn't break a single thing, and a few of these hits were hard enough to shear the graphite arms in half.
anyway, thanks for experimenting with new materials Losi, looks like you've found a winner with this new stuff.
anyway, thanks for experimenting with new materials Losi, looks like you've found a winner with this new stuff.
That is great to hear. At SW we used the arms and they worked great. No one broke a arm all weekend. The new car will come with full EA3 components.