Team Losi JRXS
03-09-2005, 04:42 PM
#2716
The front spindles, carriers and rear hubs are all the same as the xxx-s, correct?
03-09-2005, 05:00 PM
#2717
the spindle are not the same there is another hole on it..
03-09-2005, 05:59 PM
#2719
Tech Regular
at least 2
Last edited by Tony Szep; 03-10-2005 at 04:43 AM.
03-09-2005, 06:37 PM
#2721
Delay of JRXS
Guys,
Here is the reason things have taken so long. We have rec'd the parts for the car and some of the parts were of horrible quality. Team Losi is all about quality and we will not ship this kit until everything is right. We apologize for the delay however we want to provide the best kit possible.
Here is the reason things have taken so long. We have rec'd the parts for the car and some of the parts were of horrible quality. Team Losi is all about quality and we will not ship this kit until everything is right. We apologize for the delay however we want to provide the best kit possible.
03-09-2005, 06:43 PM
#2722
stumper -Dumas left TL simply because he got a job at RC America. He contacted us for a job however we did not have anything for him at the time. As for David leaving TL, he wanted to move onto something else.
Juan Valdez-The car will come with 35lb front spring and a 12.5lb rear spring. For pistons it has #60 in the front and #57 in the rear. All the other springs and pistons are aftermarket items.
imprsme-The hubs and caster blocks will work from the XXX-S However you will need to trim the front of the caster block a bit for shock clearance if you decide to use the XXX-S caster blocks. It is no big deal. I have been doing this ever since I built my car. The front spindles are new in the respect that we have added another hole for the ackerman position.
SHOTS OF EXPRESSO-Hmmm........maybe a couple.
Juan Valdez-The car will come with 35lb front spring and a 12.5lb rear spring. For pistons it has #60 in the front and #57 in the rear. All the other springs and pistons are aftermarket items.
imprsme-The hubs and caster blocks will work from the XXX-S However you will need to trim the front of the caster block a bit for shock clearance if you decide to use the XXX-S caster blocks. It is no big deal. I have been doing this ever since I built my car. The front spindles are new in the respect that we have added another hole for the ackerman position.
SHOTS OF EXPRESSO-Hmmm........maybe a couple.
03-09-2005, 06:46 PM
#2723
Thanks Todd!
So is there another delay? Or are they still on for shipment this week?
So is there another delay? Or are they still on for shipment this week?
03-09-2005, 07:11 PM
#2725
Originally posted by T. Hodge
SHOTS OF EXPRESSO-Hmmm........maybe a couple.
SHOTS OF EXPRESSO-Hmmm........maybe a couple.
03-09-2005, 07:17 PM
#2726
60lb-LOS5357
42.5lbs-LOS5355
Sway bar-LOS4252
All of the part numbers are on Horizons site now.
42.5lbs-LOS5355
Sway bar-LOS4252
All of the part numbers are on Horizons site now.
03-09-2005, 07:26 PM
#2728
Tech Fanatic
Rayhaung, 60lb spring part # losa5357, as for a 45lb spring I do not have a #, but here are the #'s for 42.5lbs losa5355, or 50lbs losa5356. Sway bar set; front or rear (4 bars) part # losa4252.
03-09-2005, 07:27 PM
#2729
Tech Fanatic
You got it , sorry a little late
03-09-2005, 07:31 PM
#2730
Ray- if you click on the pick of the car on the main page then scroll down it says optional parts. That way you can see EVERYTHING!
I have a whole page of part #'s in front of me so I can place an order! lol
I have a whole page of part #'s in front of me so I can place an order! lol