Ask Steve "The Evicerator" Weiss
#6166
The Evicerator
I'd probably start out with around a 9.6 FDR or so.
As far as setup changes go you will probably need to go a little stiffer over-all... but at the same time you will need to retain steering in your car.
As far as setup changes go you will probably need to go a little stiffer over-all... but at the same time you will need to retain steering in your car.
#6167
Tech Elite
iTrader: (2)
Thanks Steve, I'll try that this coming saturday morning and if the car is working well enough I might sign up and get initiated in mod. Don't worry I will stay out of the way....lol
Sorry for the multuple ???s but how do you try to retain steering with a stiffer setting?
Sorry for the multuple ???s but how do you try to retain steering with a stiffer setting?
#6168
The Evicerator
Well, there is no one answer... it really depends on your car, setup, driving style... you're going to have to start tuning things like camber, caster, camberlinks, arm geometry and whatnot.
#6170
The Evicerator
Sorry you're having trouble getting through over here!
The systems have just been released from engineering and approved for production... hopefully stuff should start rolling out relatively quickly!
The systems have just been released from engineering and approved for production... hopefully stuff should start rolling out relatively quickly!
#6171
The Evicerator
Reedy Race FYI
Reedy Race FYI
I will be attending the Reedy Race but it will not be there in an Official Novak Capacity... so I will not have spares or anything with me to check the function/legality/condition of your Novak Products.
I reccomend that you bring any spares and extras you have with you to the race.
Sorry for the inconvenience.
I will be attending the Reedy Race but it will not be there in an Official Novak Capacity... so I will not have spares or anything with me to check the function/legality/condition of your Novak Products.
I reccomend that you bring any spares and extras you have with you to the race.
Sorry for the inconvenience.
#6172
Tech Master
Join Date: Oct 2003
Location: Bending Corners R/C Raceway(s) 2190 North Canal Street Orange, CA 92865
Posts: 1,140
Good Morning Steve.
Raff here!
Hope everything is going well. Just wanted to say, you are doing an excellent job on this board. I have read over 400 postings here.
Keep up the good work.
Raff here!
Hope everything is going well. Just wanted to say, you are doing an excellent job on this board. I have read over 400 postings here.
Keep up the good work.
#6173
The Evicerator
Thanks Raff! It feels nice to be recognized!
#6176
LOL. Steve you're doing a great job with this message board bud. A great job. Saved me dozens and dozens of emails by the looks of things.
#6177
Clint, No, you don't count.
#6178
is this were you ask questions? if so i bought a gtb and a 3.5 that came in the same package. i can not run the 3.5 with out the speedo thermalling. i have no trouble with the 4.5. is there anything i can do to run the 3.5 like maybe a bigger capacitor.
#6180
Tech Rookie
Hey I am just installing my new Novak 7.5r (we run 12t/7.5 limit) and just curious as I am about to go start testing and working my gear ratio's where do you measure the temps to keep under the max as I can imagine the solder posts would get hotter than the can etc....
Any help greatly appreciated
Any help greatly appreciated