Ask Steve "The Evicerator" Weiss
#4817
The Evicerator
hahahahah
#4818
#4821
Tech Champion
iTrader: (79)
Granpa,
...Where it gets sticky is if the lipo gets discharged too low it can severely damage the battery...so more and more ESCs are becoming equiped with Lipo Saftey Cut Offs...which just prevent the battery from being discharged too low by cutting off power to the motor...
...Where it gets sticky is if the lipo gets discharged too low it can severely damage the battery...so more and more ESCs are becoming equiped with Lipo Saftey Cut Offs...which just prevent the battery from being discharged too low by cutting off power to the motor...
#4822
Tech Elite
iTrader: (6)
http://www.gearchart.com/swr_200706.html
#4823
The Evicerator
Um, there are a couple ways to tell:
The first way is to look at the PC board from the bottom... I'm farmilliar with boy versions and can tell the difference...but I don't think you could do the same... just because you're not farmilliar with them.
The second way is to power it up and press and hold the setup button ... keep holding it through the adjustment sequences ...i f the red and yellow LEDs light up together that esc has the lipo cut off circuitry and software built into it.
Third way is if it is a spread spectrum version GTB...those all have Lipo built into them.
If you see me around somewhere just let me take a look at it.
#4827
The Evicerator
Hey Art!
Sorry that I missed the SW Cup this weekend!
Spent 95% of my time this weekend sick in bed
Sorry that I missed the SW Cup this weekend!
Spent 95% of my time this weekend sick in bed
#4828
Tech Elite
iTrader: (41)
OK...got another more general-interest question...
I just swapped my SS+ speed control last week and got a "SuperSport 2" in exchange. It looks like an XBR to me...but I'll play along...LOL...
Anyways, the XBR has LiPo cutoff, right? Does the SuperSport 2 have it as well? I looked for the instructions on the website, but I didn't see them.
It fits very differently...but it actually fits the Lazer a little better. I had to turn it sideways and run the receiver outboard of it. It's nice having the terminals on top and a fan connector.
I just swapped my SS+ speed control last week and got a "SuperSport 2" in exchange. It looks like an XBR to me...but I'll play along...LOL...
Anyways, the XBR has LiPo cutoff, right? Does the SuperSport 2 have it as well? I looked for the instructions on the website, but I didn't see them.
It fits very differently...but it actually fits the Lazer a little better. I had to turn it sideways and run the receiver outboard of it. It's nice having the terminals on top and a fan connector.
#4830
Tech Master
iTrader: (19)
I wasn't feeling well myself this weekend. I got a new ride for Father's Day though! Made me smile!
3 LAPS!
Plus a "PUNT" for General Priciples! GP for those in the know......