Barracuda from Alex racing
#1051
Tech Adept
Re: Re: Barracuda Spool
Originally posted by EAMotorsports
I know somewhere that is VERY reasonable on anodizing if you are interested.
eric a
I know somewhere that is VERY reasonable on anodizing if you are interested.
eric a
#1052
fo sho
no anodizing in memphis for sure closest is jackson ms,,,,,
yo eric how bout i send you a uber pimp cuda for the state race
yo spooler i just called you check your cell ...
minimum up here in indy is 100.00 but its 8 miles from home and he will do hard anodizing which is really sweet ...
i will have a set of lowered pods in the afternoon tomorrow went ahead and did them 2 mm lower ...
yo eric how bout i send you a uber pimp cuda for the state race
yo spooler i just called you check your cell ...
minimum up here in indy is 100.00 but its 8 miles from home and he will do hard anodizing which is really sweet ...
i will have a set of lowered pods in the afternoon tomorrow went ahead and did them 2 mm lower ...
#1053
So anybody got any good fish (barracuda) stories?? Who out there is racing one?? Any reports on how good it handles, what kind of part problems??
#1055
Team EAM
iTrader: (79)
Re: fo sho
Originally posted by dynoman007
no anodizing in memphis for sure closest is jackson ms,,,,,
yo eric how bout i send you a uber pimp cuda for the state race
yo spooler i just called you check your cell ...
minimum up here in indy is 100.00 but its 8 miles from home and he will do hard anodizing which is really sweet ...
i will have a set of lowered pods in the afternoon tomorrow went ahead and did them 2 mm lower ...
no anodizing in memphis for sure closest is jackson ms,,,,,
yo eric how bout i send you a uber pimp cuda for the state race
yo spooler i just called you check your cell ...
minimum up here in indy is 100.00 but its 8 miles from home and he will do hard anodizing which is really sweet ...
i will have a set of lowered pods in the afternoon tomorrow went ahead and did them 2 mm lower ...
eric
#1056
Tech Champion
iTrader: (31)
Originally posted by Evoracer
Yo Dave..Aqua green!!?? Why not a pale lavender with a slight hint of mauve !!! . All that grey and sea blue must be gettin' to you !! As for me I'll stick with red, blue and purple !!!
Yo Dave..Aqua green!!?? Why not a pale lavender with a slight hint of mauve !!! . All that grey and sea blue must be gettin' to you !! As for me I'll stick with red, blue and purple !!!
Naww It's just that Light Purple would be the Shiezay' Aqua to because not to many people have it... Kind of a Teal Green
-Dave
#1057
Tech Champion
iTrader: (31)
Originally posted by EAMotorsports
Im not actually the one who does it. We have a guy up north in New Jersey that does all our oval cars for Hyperdrive. He has given us excellnt results. I can check on the colors for you if you are interested. Its usually around 40.00 for a lot (we sent 100 cars and it was still only 40.00). Its hard to make their maximum. But 40 is always the min.
ea
Im not actually the one who does it. We have a guy up north in New Jersey that does all our oval cars for Hyperdrive. He has given us excellnt results. I can check on the colors for you if you are interested. Its usually around 40.00 for a lot (we sent 100 cars and it was still only 40.00). Its hard to make their maximum. But 40 is always the min.
ea
!!! man I could take apart all my cars and send you every piece of Alumi that I have !!!!! Man thats cheap,..... Could you do use a favor and let us know what colors they can do!!
-Dave
#1059
cuda magic
ea gimme shout if you kept my number ...
dave jack a------ didnt get me the pods back today so i didnt get to run them yet will be monday note now ..
i got the first regular run of the billet spools this morn it fits excellent and runs very well ......the stock 1 wat weighs 20 grams
a delrin spool with stock outer pieces nicely machined and pressed into alum bushings weighs 16 grams ....the new alum spool weighs10 grams..... enuf said lol
as dave is on the boat and his time is limited i will be happy to try and assist in answering any cuda questions that may exist ...
i currently have 3 cudas 1 regular hopped up cuda 1 cuda with batts moved and speedway pal conversion arms with 1 piece motor mount center 1 way shaft and other trick goodies and last but not least i have a speedway pal car which has the batts on the left side which makes for a fine oval touring car lol .....
dave jack a------ didnt get me the pods back today so i didnt get to run them yet will be monday note now ..
i got the first regular run of the billet spools this morn it fits excellent and runs very well ......the stock 1 wat weighs 20 grams
a delrin spool with stock outer pieces nicely machined and pressed into alum bushings weighs 16 grams ....the new alum spool weighs10 grams..... enuf said lol
as dave is on the boat and his time is limited i will be happy to try and assist in answering any cuda questions that may exist ...
i currently have 3 cudas 1 regular hopped up cuda 1 cuda with batts moved and speedway pal conversion arms with 1 piece motor mount center 1 way shaft and other trick goodies and last but not least i have a speedway pal car which has the batts on the left side which makes for a fine oval touring car lol .....
#1061
Tech Rookie
Re: Cuda Magic
so dude, i get an A+ on the spool?
thanks for the uplift, always like to here how my work turns out.
thanks for the uplift, always like to here how my work turns out.
#1062
Tech Champion
iTrader: (31)
Re: Re: Cuda Magic
Originally posted by spooler
so dude, i get an A+ on the spool?
thanks for the uplift, always like to here how my work turns out.
so dude, i get an A+ on the spool?
thanks for the uplift, always like to here how my work turns out.
I told one person about it and It like 3~4 different Japanese people that my R/C buddy know start asking me a whole bunch of Q's and stuff .. In really bad broken english at that
-Dave
Last edited by JDM_DOHC_SiR; 03-01-2003 at 05:02 PM.
#1063
Regional Moderator
dynoman (david)........ has gone freakin cuda crazy this man eats -sleeps-talks cudas im telling you david and dave need to be a poster child for cudas
Last edited by Ko Racer; 03-01-2003 at 05:10 PM.
#1064
Tech Champion
iTrader: (31)
Originally posted by Ko Racer
dynoman (david)........ has gone freakin cuda crazy this man eats -sleeps-talks cudas im telling you david and dave need to be a poster child for cudas
dynoman (david)........ has gone freakin cuda crazy this man eats -sleeps-talks cudas im telling you david and dave need to be a poster child for cudas
Joseph.....come on now were both not that "BAD".. ..?? what qualifies us.. ....3 Or more Barracuda's..?
Well Sign me up.!!
-Dave
#1065
Regional Moderator
LOL I thought you would like that and yes you must have 3 cudas before having a chance for the poster deal