Team Associated TC4
#6781
hey guys check out the new ride!
#6782
Tech Elite
iTrader: (49)
Toooshay (If I'm gunna spell it wrong at least I can do it with flair)
Maybe I should have explained better. I have tested the chassis on several relatively flat surfaces with all the same results. i.e. the same amount of rocking in the same direction. I have tried it on a set up board and counter tops and a marble bathroom counter and laminate kitchen counter. all the same results. Aside from manufacturer defects and hot batteries warping the chassis what other ways are there for a chassis to go bad like this? I dont mind dropping the 20 bucks to replace the chassis, but I want to keep it from happening again as this has become a royal pain in the rear.
Maybe I should have explained better. I have tested the chassis on several relatively flat surfaces with all the same results. i.e. the same amount of rocking in the same direction. I have tried it on a set up board and counter tops and a marble bathroom counter and laminate kitchen counter. all the same results. Aside from manufacturer defects and hot batteries warping the chassis what other ways are there for a chassis to go bad like this? I dont mind dropping the 20 bucks to replace the chassis, but I want to keep it from happening again as this has become a royal pain in the rear.
Last edited by andrewdoherty; 10-18-2005 at 04:58 AM.
#6783
Tech Master
iTrader: (2)
Originally Posted by andrewdoherty
Toooshay (If I'm gunna spell it wrong at least I can do it with flair)
Maybe I should have explained better. I have tested the chassis on several relatively flat surfaces with all the same results. i.e. the same amount of rocking in the same direction. I have tried it on a set up board and counter tops and a marble bathroom counter and laminate kitchen counter. all the same results. Aside from manufacturer defects and hot batteries warping the chassis what toher ways are there for a chassis to bad like this? I dont mind dropping the 20 bucks to replace the chassis, but I want to keep it from happening again as this has become a royal pain in the rear.
Maybe I should have explained better. I have tested the chassis on several relatively flat surfaces with all the same results. i.e. the same amount of rocking in the same direction. I have tried it on a set up board and counter tops and a marble bathroom counter and laminate kitchen counter. all the same results. Aside from manufacturer defects and hot batteries warping the chassis what toher ways are there for a chassis to bad like this? I dont mind dropping the 20 bucks to replace the chassis, but I want to keep it from happening again as this has become a royal pain in the rear.
#6784
Bob Barry,
makes sense even to me.
Thanks
makes sense even to me.
Thanks
#6786
Tech Master
iTrader: (13)
Originally Posted by andrewdoherty
Toooshay (If I'm gunna spell it wrong at least I can do it with flair)
Maybe I should have explained better. I have tested the chassis on several relatively flat surfaces with all the same results. i.e. the same amount of rocking in the same direction. I have tried it on a set up board and counter tops and a marble bathroom counter and laminate kitchen counter. all the same results. Aside from manufacturer defects and hot batteries warping the chassis what other ways are there for a chassis to go bad like this? I dont mind dropping the 20 bucks to replace the chassis, but I want to keep it from happening again as this has become a royal pain in the rear.
Maybe I should have explained better. I have tested the chassis on several relatively flat surfaces with all the same results. i.e. the same amount of rocking in the same direction. I have tried it on a set up board and counter tops and a marble bathroom counter and laminate kitchen counter. all the same results. Aside from manufacturer defects and hot batteries warping the chassis what other ways are there for a chassis to go bad like this? I dont mind dropping the 20 bucks to replace the chassis, but I want to keep it from happening again as this has become a royal pain in the rear.
#6787
could you please tell me<if anyone know>when i can find diff thrust bearing for tc4 as losi's xxxs thrust?
#6789
Tech Elite
iTrader: (49)
The chassis was only used on carpet so although it has been used for several months, it has no wear. I am assuming you meant wear from racing asphalt, right?
Bob-Yeah you're right. And teh one posted looks like a good deal. I got to get out of the dog house for getting the FK05 first. May be a month or two.
Andrew
Bob-Yeah you're right. And teh one posted looks like a good deal. I got to get out of the dog house for getting the FK05 first. May be a month or two.
Andrew
#6790
Originally Posted by bhambrent
I'm selling my BMI chassis for $85. If anyone wants it pm me.
#6793
#6794
Tech Elite
iTrader: (1)
Hey guys, i got a bit of tracktime yesterday, met Tag of Express Motorsports, he came up for some practice for the Halloween Classic... hes a cool guy. He didnt stay long though, long drive home for him. I tried a completely different setup for my FT, it worked well. Still pushed a bit coming into/middle of the corner, but i think it is a really good place to start for standard foams (no two stage) on the rug. How did everyone elses racing go this weekend?
- DaveW
- DaveW
#6795
Dave I am trying to order ceramic bearings from the website but it keeps asking which merchant am I. What do I need to do to complete the order.