narcotiks

iTrader: (8)

Hey Kevin What is a good starting point for gearing and settings with the sxx ss v2 and x12 21.5 motor with the 13.0 mm works team rotor running 21.5 boosted on outdoor asphault track with a 35-40 m straight ?
Thanks

M.Abramowicz

iTrader: (1)

Hi Kev!

Who made this conversion:


?

Rocky8333

iTrader: (30)

Most likely an AE prototype. I believe all the factory AE pilots were running this car at the Worlds, and expect that it is at least an iteration of what the next 12th from AE will look like.

Madulla

I saw some running a different center shock. Also some parts were not anodized and some were team ae colors. Congrats to you and the team good finish at the worlds.
Big question is Santa going to bring me one of these?

M.Abramowicz

iTrader: (1)

But there at front end still bad design for me

Bottom screw can touch screw from a-arm ...

M.Abramowicz

iTrader: (1)

Interesting cut offs from chassis:

JustWill75

I think Mike Haynes came up with this earlier this year for running on asphalt.

racer x 1

iTrader: (27)

question: what exactly is the point for drilling the shock caps? Ive heard it makes them more consistent... Whats your take on this?

Rick Hohwart

Keven's car is the prototype AE 12R5.2. Volker and I ran production versions which differ slightly in that the aluminum is anodized blue, we use the AE center shock, and the front suspension mounts from the outside of the bulkhead with a single screw (no inserts)

It is only a problem if you use the wrong screw length

The chassis is narrowed all around, not just the sides Not sure if this will be a production item or not.

RacinJ

Is there a new car kit, conversion kit or conversion parts on the way out soon?

Rick Hohwart

There will be a new car kit which should be announced this week. It will be in stores in time for the carpet racing season.

There won't be a conversion kit but all the parts can be fitted to an older car so you can buy the parts as you need them.

hanulec

iTrader: (28)

you cannot keep Mike Haynes away from a dremel!

mos-leung

What's the model of servo ? futaba or JR ?

DARKSIDE

iTrader: (2)

congrads to all the AE team members at the Worlds..

I like the 12th scale...Ill be looking to get back into 12th scale this winter as my 2nd class

Rocky8333

iTrader: (30)

KO Propo