M3dreamin2008

iTrader: (1)

what size spur are you using? Motor?

malkiy

iTrader: (10)

95t speedtech spur geared at 3.83. Using a duo 3.

M3dreamin2008

iTrader: (1)

Are you using the kit set up?

malkiy

iTrader: (10)

Yes but running no spacers under the hinge pin blocks.

svines1972

iTrader: (26)

Can someone lead me in the right direction on how to adjust the Stabilizer Bars. I am in the build process and have installed both. On the front, both sides rise evenly with very little delay. But, on the rear one side takes longer to rise than the other. I can't figure out why, I have tried both adjustment grub screws and I am not seeing any improvement. Is there a tutorial available that I can watch?

superspeed

iTrader: (5)

Are the rear shocks detached when you tested the sway bar? The shocks got to be equal length, tension, down & up travel. Also there is the droop setting/adjustment as well. Make sure the left and right side have same amount of droop.

svines1972

iTrader: (26)

This is with no shocks. Droop is the same both sides.

GeorgePravata

iTrader: (171)

what the best body to run on the TRF 417 out doors.

Thanks

Chris Furman

iTrader: (118)

Take the sway bar off and set it on a flat board, make sure it sits flat and is not bent.

Bigger Brother

http://www.thard.co.uk/viewtopic.php?f=49&t=405

Read it through carefully, it is dead simple to do this way

HTH

TryHard

iTrader: (4)

Also have a look at posts #413, 416 and 417 ( hadn't spotted that) in this thread, back on page 28.
Might help to explain the technique a bit better.

http://www.rctech.net/forum/electric...ml#post8391367

Qatmix

Mine is still in its box I am waiting for all of the diff parts to be released as a spool is useless to me... Hurry up Tamiya!!!

jorgesimes

this??:

http://rcmarket.com.hk/product_info....8o88dqc3b2ee42

jonest

iTrader: (10)

RC Market has them in stock already!

syndr0me

iTrader: (32)

I talked to Jilles for a while tonight (thanks again for the tires and the help all week). He put a gear diff in the front of his car with 500k and attributed the additional steering to his being able to TQ mod in the last round. He said he's running 1k in the rear gear diff.

As for me, my car has traction rolled off the track every run since the end of the first day. I've tried every suggestion imaginable. I'm basically giving up and putting the long arms on the car in hopes of finishing a race.