Tamiya TRF417
#3391
this is probably answered before, so sorry in advance, but does the 417x motor mount fit perfectly into the 417, thanks
#3393
Tech Regular
417X torque steer - mod racing
Besides softening the rear & stiffening the front, are there any usual, obvious setup checks to alleviate torque steer?
Any recommendations/ideas would be appreciated.
Thanks!!
Any recommendations/ideas would be appreciated.
Thanks!!
#3396
Tech Master
your chassis sounds tweaked, binding in the suspension or stuck bearing... any thing can cause that. But a belt car typically won't torque steer...
#3397
Tech Regular
#3399
Tech Regular
#3400
take your shocks off and recheck everything. make sure shock shaft is not bent. The gear diff should not be too notchy or too free that the teeth skips. If all mechanical issues are ok, you can give a little more front droop to give it a little more rear traction. Also test on new tires. Old worn tires can lose grip suddenly sometimes.
#3404
Tech Champion
iTrader: (34)
Don't take them apart, just spray them with contact cleaner and blow them with a compressor then regrease