MurfDogg Synergy Brushless Motors
10-13-2010, 10:09 AM
#166
That's easy. If 10.5 is too fast, go to 13.5. If that is too fast, go to 17.5. Still too fast, 21.5. Why does everyone insist on changing the speedo when slower motors are available to everyone and often cheaper than a new speedo?
10-13-2010, 10:28 AM
#167
zero
Zero timing just makes having a tuned motor for your type of racing just that much more important. That is what I think is so great about Murfdogg Motors. You are getting exactly what you need to compete in the top of your class. The motor for Short Course is not the same for 1/12 scale.
I say bring on the zero timing rule... I running a Murfdogg motor.
I say bring on the zero timing rule... I running a Murfdogg motor.
10-15-2010, 01:48 PM
#170
10-21-2010, 03:37 AM
#171
All paid orders have been shipped or are shipping today.
17.5s are sold out.
13.5 1s and 2s motors in stock
10.5 1s and 2s motors in stock
4.0, 4.5, 6.5 turn Mods in stock also.
Thank you to all of our great MurfDogg Customers!
Matt Murphy
MurfDogg Racing
17.5s are sold out.
13.5 1s and 2s motors in stock
10.5 1s and 2s motors in stock
4.0, 4.5, 6.5 turn Mods in stock also.
Thank you to all of our great MurfDogg Customers!
Matt Murphy
MurfDogg Racing
10-21-2010, 06:05 AM
#172
how long until the next batch of 17.5's?
11-03-2010, 10:36 PM
#177
Stock Update!
MurfDogg Synergy Motors are back in stock in all winds EXCEPT 10.5 turns.
4.0, 4.5, 5.5, 6.5, 7.5, 8.5, 13.5, and 17.5 turn motors are in stock and ready to ship!
Get them while you can, they are selling quick! Although the next batch is only a few weeks away, so we should not have any extended periods of time with motors out of stock.
Outdoor season is over and with most racers moving indoors for the winter, we are selling alot of single cell motors for 12th scale cars and WGT cars.
We make single cell 10.5, 13.5 and 17.5 motors, so we have a motor for EVERY application!
Thanks!
Matt Murphy
MurfDogg Motor Works
4.0, 4.5, 5.5, 6.5, 7.5, 8.5, 13.5, and 17.5 turn motors are in stock and ready to ship!
Get them while you can, they are selling quick! Although the next batch is only a few weeks away, so we should not have any extended periods of time with motors out of stock.
Outdoor season is over and with most racers moving indoors for the winter, we are selling alot of single cell motors for 12th scale cars and WGT cars.
We make single cell 10.5, 13.5 and 17.5 motors, so we have a motor for EVERY application!
Thanks!
Matt Murphy
MurfDogg Motor Works
11-03-2010, 10:58 PM
#178
Seen one of these run at my local track. I think it will be my next motor. Fast and consistent.
11-08-2010, 09:01 AM
#180
Hey Matt,
Raced round 2 of the Electric Championship Tour (ECT) this weekend. In short course stock I TQ'd and won the first two mains almost lapping the entire field. 2nd and 3rd were battling so I followed after catching them.
This is a zero speed control timing series so my set-up was
SC10 ft
Tekin 212 software with zero timing
Murfdogg synergy 17.5 with timing set at +5 on the motor
FDR of 7.49
Peak 5400 45c pack (with a new 60c this would have been a rocket)
You should be getting some e-mails for some 17.5 motors from a few racers this week.
Raced round 2 of the Electric Championship Tour (ECT) this weekend. In short course stock I TQ'd and won the first two mains almost lapping the entire field. 2nd and 3rd were battling so I followed after catching them.
This is a zero speed control timing series so my set-up was
SC10 ft
Tekin 212 software with zero timing
Murfdogg synergy 17.5 with timing set at +5 on the motor
FDR of 7.49
Peak 5400 45c pack (with a new 60c this would have been a rocket)
You should be getting some e-mails for some 17.5 motors from a few racers this week.