R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   Team Associated TC6 Thread (https://www.rctech.net/forum/electric-road/414655-team-associated-tc6-thread.html)

justchris 08-24-2012 03:45 PM


Originally Posted by evochick (Post 11126651)
This thread needs some TC6.1 action shots

This is from our state based Club Challenge Cup series last weekend.
I qualified 3rd in Blinky for the A Main, but got overtaken by the 2 quicker cars behind me and finished 5th for the day and 4th overall for the series for the year.

http://farm8.staticflickr.com/7124/7...92f5241c_c.jpg

http://farm8.staticflickr.com/7119/7...f23028a7_c.jpg

All photos by Leigh Nelson © Copyright 2012 All rights reserved

Beth

Really Really good photos.!!!!!!!!!!!!!!!!!!!

geeunit1014 08-24-2012 08:04 PM


Originally Posted by losi888 (Post 11131426)
Is that 1mm shim in front (in front of a arm) and 1mm shim in the rear (on the back side of a arm).

Yes

KHoff7 08-24-2012 08:19 PM


Originally Posted by geeunit1014 (Post 11133169)
Yes

Agreed

losi888 08-26-2012 08:43 AM

What is a good gear ratio to start out with for vegas sized carpet track. Running 17.5 trinity D3.5 timing turned up. Thanks.

racer x 1 08-26-2012 04:04 PM

Tek 6
 
So after another long day of trying things and driving I think ive finally got my car on pace for my local 17.5 blinky class. :nod: it turns out short camber links and a high roll center was key as most of you suggested. Thank you.

bhambrent 08-27-2012 01:11 PM

Congrats to Rick Howart for his tc mod win.:nod:


ROAR Electric On Road Paved Nationals

1-10 Touring Modified

Driver Name (Q#)A1 Points Total

Hohwart, Rick (1) 100 (1=24/6:10.374) 100
Lemieux, Paul (2) 99 (2=24/6:14.961) 99
Hebert, Keven (3)98 (3=23/6:01.882) 98
Cochran, Sean (997 (4=23/6:10.023) 97
Alexander, Aaron (5)96 (5=23/6:11.468 96
Hardman, Andrew (4)95 (6=23/6:12.394) 95
Erchinger, Ethan (7)94 (7=23/6:14.615) 94
Jucha, Brian (8) 93 (8=22/6:01.641) 93
Evans, EJ (10) 92 (9=22/6:17.410) 92
Vik, Tyler (6) 91 (10=11/2:49.483) 91

ekim628 08-27-2012 02:10 PM

Congrats Rick!!! AKA Mr. Reedy Man:tire::tire::tire:

Now can you post your kick-ass setup for all of us :sweat:

Eric-

Rick Hohwart 08-28-2012 11:04 AM


Originally Posted by ekim628 (Post 11142346)
Congrats Rick!!! AKA Mr. Reedy Man:tire::tire::tire:

Now can you post your kick-ass setup for all of us :sweat:

Eric-

Thanks!

Here it is!

Hebert ran almost identical and this is very close to Juho's World's setup.

rosko 08-28-2012 11:26 AM

Any one using the exotek conversion? What differences did you feel on the track between the stock and exotek conversion

M.Abramowicz 08-28-2012 02:06 PM

Hi Rick!

Can you post pictures of car?

Thank you!

edit: can you share hpi silver spring LBS rate?
btw, lipo has connectors, they are in rear or front ;) ?

R Doyel 08-28-2012 02:20 PM


Originally Posted by Rick Hohwart (Post 11146291)
Thanks!

Here it is!

Hebert ran almost identical and this is very close to Juho's World's setup.

Rick, thanks for posting this. I'm anxious to try it. I'm a little confused on the springs, though. What would be an equivelant to the HPI silver, in RSD or Associated? I tried doing the math on the rating and it came out to like 8 lbs/in. Is that right?

Thanks, Ryan

CristianTabush 08-28-2012 02:37 PM

HPI Silver are roughly equivalent the new RSD Purple Spring. They are rated by HPI at 16.9lb springs.

From our tests, they are slightly stiffer than the RSD Red, and softer than AE blue. This is where the purple spring falls.

R Doyel 08-28-2012 02:43 PM


Originally Posted by CristianTabush (Post 11146988)
HPI Silver are roughly equivalent the new RSD Purple Spring. They are rated by HPI at 16.9lb springs.

From our tests, they are slightly stiffer than the RSD Red, and softer than AE blue. This is where the purple spring falls.

Thanks, Cristian. I figured my math had to be wrong :lol:
Look for an order from me :nod:

wtcc 08-28-2012 07:47 PM


Originally Posted by Rick Hohwart (Post 11146291)
Thanks!

Here it is!

Hebert ran almost identical and this is very close to Juho's World's setup.

My IPad 3 always opens the AE setup sheets without the filled fields :( Does someone know how to solve this?

evochick 08-28-2012 08:00 PM


Originally Posted by wtcc (Post 11148209)
My IPad 3 always opens the AE setup sheets without the filled fields :( Does someone know how to solve this?

I can see me getting flamed for this

Adobe on Android works fine, can you install Adobe on an Ipad ??

This is coming from someone whe does not own and never will buy a product from Apple.

Beth.


All times are GMT -7. It is currently 03:28 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.