Hot Bodies TCX
#2942
Tech Adept
iTrader: (1)
Hi
The Tcx comes with a spool up front and a ball diff in the rear. I have Tamiya 3 hole 1.1mm pistons in my shocks. I would recommend changing the front bones to the Pro D 46mm ones for strength. These seem to only be available from Hong Kong. Once you have the Pro D bones fitted the spool outdrives become the next weak point, I have a Roche spool ready to fit in mine which I'm going to run with T O P Photon bones as the Roche spool outdrives slots are too narrow to take the Pro D bones. Apart from a few shims here and there that's it. Enjoy!
The Tcx comes with a spool up front and a ball diff in the rear. I have Tamiya 3 hole 1.1mm pistons in my shocks. I would recommend changing the front bones to the Pro D 46mm ones for strength. These seem to only be available from Hong Kong. Once you have the Pro D bones fitted the spool outdrives become the next weak point, I have a Roche spool ready to fit in mine which I'm going to run with T O P Photon bones as the Roche spool outdrives slots are too narrow to take the Pro D bones. Apart from a few shims here and there that's it. Enjoy!
#2944
Hara at Reedy
#2946
is that the hot bodies subaru type c?
#2950
Anyone know why the old sway bar from the TC is being used on Haras car at the Reedy race? Along with the moorespeed cyclone sway bar holder.. is it a better sway bar setup compared to the new TCX setup?
http://www.rctech.net/forum/attachme...a3veeb0eme.jpg
http://www.rctech.net/forum/attachme...a3veeb0eme.jpg
#2953
Tech Champion
iTrader: (30)
Anyone know why the old sway bar from the TC is being used on Haras car at the Reedy race? Along with the moorespeed cyclone sway bar holder.. is it a better sway bar setup compared to the new TCX setup?
http://www.rctech.net/forum/attachme...a3veeb0eme.jpg
http://www.rctech.net/forum/attachme...a3veeb0eme.jpg
I run that style setup on my cyclone TC and its cool because the swaybay freely pivots up and down (like its supposed to with the suspension arms) and doens't move left to right...plus you won't get the sway bar all binded up with the set screws..I'm actually going to switch mine over to this setup as well - I was waiting to see if anyone actually done this
#2954
Tech Regular
Hiro,
Are the new HB front steel 46mm dogbones available yet? What is the part number?
Are the new HB front steel 46mm dogbones available yet? What is the part number?
#2955
Tech Elite
iTrader: (15)