Hot Bodies TCX
04-05-2010, 06:51 AM
#1
Hot Bodies TCX
It appears that the Cyclone replacement/evolution will be called the TCX, so time for the proper thread for it. 
http://www.rcworld.ch/neueprojekte.asp?id=6560
Translated (roughly):
''The new HB touring car called TCX
According to the Japanese RC Magazine "RC Magazine is" the new Hot Bodies touring car which we have already introduced as HB prototype, called HB TCX. Further details are unfortunately only the magazine's readers without notice.
The photos can be seen from the above-mentioned changes:
# The chassis is designed for use with LiPo batteries
# The drive belts were installed new engine in the center closer
# New two-deck
# The aluminum bridge on the right front of the engine Deleted
# Position of the steering servo turned 90 degrees
# New steering''
http://www.rcworld.ch/neueprojekte.asp?id=6560
Translated (roughly):
''The new HB touring car called TCX
According to the Japanese RC Magazine "RC Magazine is" the new Hot Bodies touring car which we have already introduced as HB prototype, called HB TCX. Further details are unfortunately only the magazine's readers without notice.
The photos can be seen from the above-mentioned changes:
# The chassis is designed for use with LiPo batteries
# The drive belts were installed new engine in the center closer
# New two-deck
# The aluminum bridge on the right front of the engine Deleted
# Position of the steering servo turned 90 degrees
# New steering''
04-05-2010, 07:08 AM
#2
will it a new kit or a convertion kit for the cyclone TC?
04-05-2010, 08:13 AM
#4
Yep, the servo is as standard in the photo, but the drivetrain has been flipped, so maybe its an interim/early prototype?
Hara's TCX at the TITC:
Compared to a normal Cyclone TC:
Hara's TCX at the TITC:
Compared to a normal Cyclone TC:
04-05-2010, 09:07 AM
#6
that has a name, is a good thing!
on asphalt is very fast
On Carpet, I think we both work!
I look forward to the announcement of the sale!
on asphalt is very fast
On Carpet, I think we both work!
I look forward to the announcement of the sale!
04-05-2010, 05:05 PM
#8
Originally Posted by Rufus2000
wow, looks expensive
I wonder if there will be a cyclone s (tube) replacement...
how old is the cyclone design anyway?
I wonder if there will be a cyclone s (tube) replacement...
how old is the cyclone design anyway?
04-05-2010, 05:53 PM
#9
Tech Rookie
lots of fiber, purple aluminum, and lipo ready. can't wait
04-06-2010, 01:54 AM
#13
Originally Posted by bukil
Where do I pre-order? 
04-06-2010, 09:46 AM
#14
Originally Posted by bukil
Where do I pre-order?
Originally Posted by AGNO
I too would like to know.
04-06-2010, 12:07 PM
#15
later 2 months !
