Hot Bodies TCX
#1217
Just saw these on the 3racing website for the Sakura Zero...
Has anyone tried the 46mm Swing Shaft For 3racing Sakura Zero (#SAK-40A)
or the Universal Shaft 46mm For 3racing Sakura Zero (#SAK-40)?
Not sure if the pin is long enough or is it a tad bit shorter like the Tamiya ones?
os.3racing.hk/products.php?products_key=4702
os.3racing.hk/products.php?products_key=4701
Has anyone tried the 46mm Swing Shaft For 3racing Sakura Zero (#SAK-40A)
or the Universal Shaft 46mm For 3racing Sakura Zero (#SAK-40)?
Not sure if the pin is long enough or is it a tad bit shorter like the Tamiya ones?
os.3racing.hk/products.php?products_key=4702
os.3racing.hk/products.php?products_key=4701
#1218
How many teeth should I get for a pinion on this car with a 17.5T motor on a 40x80' carpet track. As I know from off road it can come down to driving style and other factors, but what would be a good place to start?
Thanks
Thanks
#1221
Tech Adept
Only used Sorex/Revlite (Pre builts) on mine and no problem.
#1222
What spare parts would you guys recommend to keep on hand for the TCX.
#1225
#1227
has anyone try steel 44mm use as front axles?
will it pop out?
still having trouble finding 44mm steel dog bones for my tcx.
i m now using tamiya 46mm but it has too much play in pool out drive
also have anyone try 6mm rear hubs? any choices besides hpi hubs?
will it pop out?
still having trouble finding 44mm steel dog bones for my tcx.
i m now using tamiya 46mm but it has too much play in pool out drive
also have anyone try 6mm rear hubs? any choices besides hpi hubs?
#1229
Tech Elite
iTrader: (18)
can fit a Tamiya TA05 steel outdrive to the spool... need to sand the ends of the spool coupler or dremel a slighlty larger hole on the outdrives for them to fit... then you wouldn't have any problems running the 46mm universals from tamiya/3racing. hths
#1230