Hot Bodies TCX
#3227
Tech Apprentice
+1
a great brand like hpi (HB) must solve this availability problem. This is not acceptable!
a great brand like hpi (HB) must solve this availability problem. This is not acceptable!
Like better parts availability? Personally, I'd like to see more stock available at the major online retailers. The LHS doesn't carry HB stuff anymore, so the only way I can get parts is to order online.
I understand the need to evolve the car, but I'll bet that most people would be more satisfied if parts were more readily available.
I understand the need to evolve the car, but I'll bet that most people would be more satisfied if parts were more readily available.
#3228
I've running the TCX for a few months now and even with a stock wide chassis I find it rarely scrub the chassis thru turns....only part that even looks scuffed is the rear...but would I definitely get the Narrow chassis...I"m sure it will look very nice.
Quick question for anyone willing to help..
Gear diff.....what weight diff oilis producing the best corner entry and exit results?
Quick question for anyone willing to help..
Gear diff.....what weight diff oilis producing the best corner entry and exit results?
#3229
Hi Guys,
When is HB releasing a gear diff for the TCX??????
I dont see a gear diff on the parts list below.....
Cheers
When is HB releasing a gear diff for the TCX??????
I dont see a gear diff on the parts list below.....
Cheers
Thanks Korey for a great explanation.
In addition to that, i just wanted to let you know we are releasing those new parts below very soon.
#68758 ALUMINUM SERVO SPACER 1mm (2pcs)
#68759 UNIVERSAL AXLE PIN COVER (2pcs)
#68760 NARROW MAIN CHASSIS (2.5mm)
#68763 FRONT SHOCK TOWER (LOW MOUNT)
#68764 REAR SHOCK TOWER (LOW MOUNT)
#68765 SHOCK PISTON 3 HOLES (1.2mm/TEFLON/2pcs)
#68768 SHOCK PISTON 6 HOLES (1.1mm/TEFLON/2pcs)
#68769 SOLID AXLE LONG CUP (STEEL/2pcs)
#68712 UPPER DECK (2.5mm)
#68770 SOLID AXLE LONG CUP (POM/2pcs)
#68772 PIVOT BLOCK FR (+0.5 DEGREE)
#68773 PIVOT BLOCK FR (+1.0 DEGREE)
#68774 PIVOT BLOCK RF (+0.5 DEGREE)
#68775 PIVOT BLOCK RF (+1.0 DEGREE)
#68776 PIVOT BLOCK (3.5 DEGREES)
#68777 PIVOT BLOCK (4.0 DEGREES)
#68794 UNIVERSAL DRIVE SHAFT 46mm (STEEL/46mm/1pc)
#68796 FRONT SPINDLE/REAR HUB CARRIER SET
We are also working on some more stuffs to make the car even better. Stay tuned!
In addition to that, i just wanted to let you know we are releasing those new parts below very soon.
#68758 ALUMINUM SERVO SPACER 1mm (2pcs)
#68759 UNIVERSAL AXLE PIN COVER (2pcs)
#68760 NARROW MAIN CHASSIS (2.5mm)
#68763 FRONT SHOCK TOWER (LOW MOUNT)
#68764 REAR SHOCK TOWER (LOW MOUNT)
#68765 SHOCK PISTON 3 HOLES (1.2mm/TEFLON/2pcs)
#68768 SHOCK PISTON 6 HOLES (1.1mm/TEFLON/2pcs)
#68769 SOLID AXLE LONG CUP (STEEL/2pcs)
#68712 UPPER DECK (2.5mm)
#68770 SOLID AXLE LONG CUP (POM/2pcs)
#68772 PIVOT BLOCK FR (+0.5 DEGREE)
#68773 PIVOT BLOCK FR (+1.0 DEGREE)
#68774 PIVOT BLOCK RF (+0.5 DEGREE)
#68775 PIVOT BLOCK RF (+1.0 DEGREE)
#68776 PIVOT BLOCK (3.5 DEGREES)
#68777 PIVOT BLOCK (4.0 DEGREES)
#68794 UNIVERSAL DRIVE SHAFT 46mm (STEEL/46mm/1pc)
#68796 FRONT SPINDLE/REAR HUB CARRIER SET
We are also working on some more stuffs to make the car even better. Stay tuned!
#3230
Availability Availability Availability
But guys, we must not forget of the recent Japanese crisis, as this would/may still have an effect on production.
Just keep up the good work at HB guys, because this car is sublime.....I love it!!!!!!!!!!!!!!!!!!!
#3231
the narrow chassis is a narrower chassis as the item name states. It is 89mm width and the cutout is very similar to the stock main chassis. This is the chassis that all HB factory team drivers used at the reedy race and ETS final round in Germany.
Thanks,
#3232
Yes we definitely take this seriously and try to solve it as soon as possible. We have been already working on this problem very hard to solve it and the situation is getting better and better every month.
Thanks for your great support.
Best regards,
Hiro Kasuya
#3233
Tech Fanatic
iTrader: (17)
That's great they are coming out with new parts.
I've had my TCX for about 6-7 months now & I have only broken a front arm, bent a front bone and recently a rear arm. I have always been lucky to find parts through my local HobbyTown, A main hobbies, TQRcracing, Speedtechrc or the HK shops. I bought extra parts that I really have not used yet. The car is built well & strong. I've put through gone through some crazy hits crashes & the car survived. Yes I admit when you try to find parts you have to farm out to different shops, but that's no big deal. Parts are out there.
I've had my TCX for about 6-7 months now & I have only broken a front arm, bent a front bone and recently a rear arm. I have always been lucky to find parts through my local HobbyTown, A main hobbies, TQRcracing, Speedtechrc or the HK shops. I bought extra parts that I really have not used yet. The car is built well & strong. I've put through gone through some crazy hits crashes & the car survived. Yes I admit when you try to find parts you have to farm out to different shops, but that's no big deal. Parts are out there.
#3234
The three magic words:
Availability Availability Availability
But guys, we must not forget of the recent Japanese crisis, as this would/may still have an effect on production.
Just keep up the good work at HB guys, because this car is sublime.....I love it!!!!!!!!!!!!!!!!!!!
Availability Availability Availability
But guys, we must not forget of the recent Japanese crisis, as this would/may still have an effect on production.
Just keep up the good work at HB guys, because this car is sublime.....I love it!!!!!!!!!!!!!!!!!!!
We will work harder to fulfill all customers expectations.
Thanks again.
Regards,
#3235
Tech Apprentice
Thank you so much for the prompt reply.
I really love my tcx too and I do not want change it with another car, but honestly here in Italy the parts availability has worsened during last months...
I seriously hope the situation will change.
Best Regards!
Gabriele Moro
I really love my tcx too and I do not want change it with another car, but honestly here in Italy the parts availability has worsened during last months...
I seriously hope the situation will change.
Best Regards!
Gabriele Moro
Dog Bone and moraccio,
Yes we definitely take this seriously and try to solve it as soon as possible. We have been already working on this problem very hard to solve it and the situation is getting better and better every month.
Thanks for your great support.
Best regards,
Hiro Kasuya
Yes we definitely take this seriously and try to solve it as soon as possible. We have been already working on this problem very hard to solve it and the situation is getting better and better every month.
Thanks for your great support.
Best regards,
Hiro Kasuya
#3236
Thanks Hiro! Can't wait to test it!
#3237
Would be nice to see some chassis parts developed for carpet ....
#3238
Tech Elite
iTrader: (29)
Thanks Korey for a great explanation.
In addition to that, i just wanted to let you know we are releasing those new parts below very soon.
#68758 ALUMINUM SERVO SPACER 1mm (2pcs)
#68759 UNIVERSAL AXLE PIN COVER (2pcs)
#68760 NARROW MAIN CHASSIS (2.5mm)
#68763 FRONT SHOCK TOWER (LOW MOUNT)
#68764 REAR SHOCK TOWER (LOW MOUNT)
#68765 SHOCK PISTON 3 HOLES (1.2mm/TEFLON/2pcs)
#68768 SHOCK PISTON 6 HOLES (1.1mm/TEFLON/2pcs)
#68769 SOLID AXLE LONG CUP (STEEL/2pcs)
#68712 UPPER DECK (2.5mm)
#68770 SOLID AXLE LONG CUP (POM/2pcs)
#68772 PIVOT BLOCK FR (+0.5 DEGREE)
#68773 PIVOT BLOCK FR (+1.0 DEGREE)
#68774 PIVOT BLOCK RF (+0.5 DEGREE)
#68775 PIVOT BLOCK RF (+1.0 DEGREE)
#68776 PIVOT BLOCK (3.5 DEGREES)
#68777 PIVOT BLOCK (4.0 DEGREES)
#68794 UNIVERSAL DRIVE SHAFT 46mm (STEEL/46mm/1pc)
#68796 FRONT SPINDLE/REAR HUB CARRIER SET
We are also working on some more stuffs to make the car even better. Stay tuned!
In addition to that, i just wanted to let you know we are releasing those new parts below very soon.
#68758 ALUMINUM SERVO SPACER 1mm (2pcs)
#68759 UNIVERSAL AXLE PIN COVER (2pcs)
#68760 NARROW MAIN CHASSIS (2.5mm)
#68763 FRONT SHOCK TOWER (LOW MOUNT)
#68764 REAR SHOCK TOWER (LOW MOUNT)
#68765 SHOCK PISTON 3 HOLES (1.2mm/TEFLON/2pcs)
#68768 SHOCK PISTON 6 HOLES (1.1mm/TEFLON/2pcs)
#68769 SOLID AXLE LONG CUP (STEEL/2pcs)
#68712 UPPER DECK (2.5mm)
#68770 SOLID AXLE LONG CUP (POM/2pcs)
#68772 PIVOT BLOCK FR (+0.5 DEGREE)
#68773 PIVOT BLOCK FR (+1.0 DEGREE)
#68774 PIVOT BLOCK RF (+0.5 DEGREE)
#68775 PIVOT BLOCK RF (+1.0 DEGREE)
#68776 PIVOT BLOCK (3.5 DEGREES)
#68777 PIVOT BLOCK (4.0 DEGREES)
#68794 UNIVERSAL DRIVE SHAFT 46mm (STEEL/46mm/1pc)
#68796 FRONT SPINDLE/REAR HUB CARRIER SET
We are also working on some more stuffs to make the car even better. Stay tuned!