Lookin' good Dave...:cool: :cool: :cool:

what other blue parts did you add on...other than the set-up wheels & turnbuckles?

All of the Blue shock parts...and the transponder /servo mount;)

I have a few more.. but that's it for these pic's:sneaky: :nod: :D
-Dave:tire:

a few small things
 

The Shaft in the EVO 4 seems to be the same size as the Pro4...so it looks like with a little test fittiing the Carbon shaft might just fit:D the pins on the EVO4 shaft are 2mm and the Pro4's are 2.3mm..... might just work out:nod:

also the EVO3 derlin diff is a direct drop in to the EVO4....:nod:

finding out more and more everyday:sneaky: :nod:
-Dave:tire:

Re: a few small things
 

Hopefully their is no diff problems as with the Evo-3 and Pro4.

Re: Re: a few small things
 

The Diff Balls are 3mm ?? kind of big:weird: :nod: ... not sure what the EVO 3's were but the diff is really smooth:nod: :sneaky:
-Dave:tire:

Re: Re: a few small things
 

I think the design is still the same. So we'll see.

Re: Re: Re: a few small things
 

Evo3's are 3mm too I belive

looks like evo 3

If the Evo3 rear diff is the same (or just drops in)... does this mean that the Speedtech Spool will work in the Evo IV?! Sounds like a good deal if it does....

I belive it will :nod:
also the oneway loks to be the same as the EVO3:D
-Dave:tire:

evo4 Dampers
 

Hi Dave ,

Is that the new suspension ( TRF dampers) new top cap?
or just the EvoIV dampers is diff from the 415?

thanks

Re: evo4 Dampers
 

Nope the Dampers are the Same as the 415 in the Kit.. also silver... I added the limited option parts ( blue parts.. ).... These blue parts are very hard too find now:cry: ... but they make taking the Dampers appart much better:nod:
-Dave:tire:

I think the speedtech spool would work, but I think it would need to be modified slightly to fit inside the new style of one-way gear.

What size file do you guys use to file down the edges of the battery slots? Any tips on how best to do this would be appreciated.

Thanks, Mark.

So if the 1 way works on evo4, maybe the evo4 bevel can fit in to
the evo3:sneaky: :weird:

im out of evo3 bevel:cry: :cry: :cry: :cry: :cry: