Steve,
We all know how good looking you are , but can we get more pix of the car?

hahahahaha...I know I know...I'm working on the other pix. I have waaaayy too many picture to sort through so it will be awhile, but here's a few more:

This is the new 5 piece gear box

Steve Wang

New smaller hub carrier and steering knuckle. This a new material Tamiya has developed which is a lot stiffer, and this allow them to make the parts smaller to save weight

Steve Wang

These are the new front and rear A-arms (again using the same new stiffer material). The biggest feature of the arms is that they are reversable. Two holes on one side and 3 holes on the other side, and according to the designer, they change the leverage by 5% increments so you can really fine tune the car.

Steve Wang

*doh* again forgot to upload picture (I really need some sleep)

Steve Wang

Steve...We love you...In a rugged, manly way....LOL

BTW: Does it look like these new TB Evolution IV Parts will bolt on to the Evo3?

Okay, Last one for now. Full option EVO IV

We are working on a special page on our website that will have a full report on all the new stuff I saw at the show.

Thanks for reading guys

Steve Wang

I can speak Japanese
The parts are:
1. 46mm Alum. Swingshaft 1200yen
2. Carbon Body Mount 1000yen
3. Ti. Wheel Axle 3000yen
4. Ti. Screw set 5000yen
5. Propeller joint A (what's that?) 500yen
6. Propeller joint B (what's that?) 500yen
7. Alum. One Way gear 2000yen
8. Alum. Servo mount 500yen
9. Anti-roll bar set 1200yen

Hope this helps

thanks micro for translating.

Seems to me the oneway is still the same as the one from the EVO3.

No problem.
I wonder if they are gonna keep the diffs open though, or if they will use something like the Cuda's.

i think they already said there is a diff box, if you look back a couple pages if i am correct.

yea there are covers, they are optional.

this car really does look the piece. im planing on changing cars later this year , this or the 415. which which which!

everypic of this car i see i want it more and more, i think im in love.

what did you mean about the switching on wishbones...5% increments?

looks like the car will throw alot of steering too... cant wait i tell ya.

Only thing i was looking at that could be enhanced. the little plastic bit holding the bevel pinion... why not aliminium? my guess is it will be pinching the bearings... time to get some wet and dry ready

Hi guys, i'm new to this thread and actually this is my first post ever.

Just wanted to say that the Evo4 looks Sweet!! but it seems to have "crappier" standard parts than the first Evo 3 eg. no alloy servo mount and no anti-roll bar set.

Right on!