set-ups
 

has anyone tired to run a 415 style geometry on their EVO'4s?

I'm interested to see if narrowing the rear of the car helps the bite (per the 415 Worlds)

Re: set-ups
 

What do you mean by the 415 style geometry?
Does the Worlds conversion kit fits the EVO4?

I think he means the 415's "old" suspension. The kit suspension as opposed to the Lightweight Reversable version (same as Evo IV). Correct me if I'm wrong.

Oh, and I seriously doubt that the conversion kit would fit an Evo IV. :p

I was refering to the trend of using narrower suspension blocks (X blocks) and running less toe-in at the hub on the 415's (ala HPI)

Not sure if the Worlds conversion (blocks) would work well with the EVO because of the lower hinge pin location on the blocks (1mm?)

You could use the EVO X blocks and the new 0' rear hub for similar effects....maybe?

I guess time and testing will tell;)

john,

i was just talking to steve about this last night. once the evoIV "X" blocks come in, i'll be buying 3 of them and then slapping a C block up front and trying it out.

so instead of D/A - A/A i'll have C/X - X/X

i'll also pick up the worlds replica 0 deg hubs. and then test. :) third sat in jan. ill be out at tamiya testing. wanna join me?

Re: Re: set-ups
 

yes.

What would be the gain for using this kit on the Evo 4?

Sounds like a plan:nod:

I'm currently running an X block set-up with slightly more rear toe (square hubs)

(Should have my MS built by then fo some back to back lap times against the EVO)

now.. we need to get mr. steve wang to join us.. then we can compare all three cars :) MS vs IV vs 415. :nod: :sneaky:

SoCal over the holidays
 

Any of you guys going to SoCal (or anywhere else in the area) over the holidays? I was going to bring my evo down south to race. I guess Saturday is a no go because of xmas, but how about Tuesday?

I'll be at SoCal next Tuesday.

Any of you Evo 4 guys know a part # for the Tamiya aluminum 1 degree hub carriers?

53784 TB EVOLUTION 4 ALUMINUM REAR UPRIGHT 1.0

vic

I'm down for 19T or stock :D I don't think I'm brave enough to participate in mod ;)

Steve Wang

Thank You

I typically only run mod nowdays (perma-loaned my fast 19t to my buddy) so I hope there will be enough people to hand me a pounding:) Do they allow foams and is that what is usually run there? It would be nice to know so I can set up my car in advance.

thanks all.