BMI Racing "Copperhead 12" discussion and support
#167
Tech Champion
iTrader: (15)
Sure Jamie... this is what I can remember off the top of my head.
BSR Dbl pink front and rear.
Associated 50wt in the shock, with a blue spring
20lb springs on the front, with 5k dampening
10k in the tubes
2mm shim under shock mount ball stud
4.5mm in rear, 4mm front
10 caster blocks with 1 shim on each end
Servo angled
Full Sauce Rear, 1/2 fronts
Speed12 body
Sorry, have to check the droop stuff.. and track widths...
BSR Dbl pink front and rear.
Associated 50wt in the shock, with a blue spring
20lb springs on the front, with 5k dampening
10k in the tubes
2mm shim under shock mount ball stud
4.5mm in rear, 4mm front
10 caster blocks with 1 shim on each end
Servo angled
Full Sauce Rear, 1/2 fronts
Speed12 body
Sorry, have to check the droop stuff.. and track widths...
#168
Yeah, the dust was real bad. Got the car running really good until the dirt got on the track. That was real tough. Those winds were sick. I couldnt believe that the tent blew over.lol You looked real good out there bro. Congrats on the win. Dont get discouraged, the track usually isnt that slippery. Normally our cars would have been glued. I went from 13.5 lap times in the 1st 2 heats to not being able to sniff a 14. The track was really bad towards the end of the day from the sand blowing onto it.
#169
Sure Jamie... this is what I can remember off the top of my head.
BSR Dbl pink front and rear.
Associated 50wt in the shock, with a blue spring
20lb springs on the front, with 5k dampening
10k in the tubes
2mm shim under shock mount ball stud
4.5mm in rear, 4mm front
10 caster blocks with 1 shim on each end
Servo angled
Full Sauce Rear, 1/2 fronts
Speed12 body
Sorry, have to check the droop stuff.. and track widths...
BSR Dbl pink front and rear.
Associated 50wt in the shock, with a blue spring
20lb springs on the front, with 5k dampening
10k in the tubes
2mm shim under shock mount ball stud
4.5mm in rear, 4mm front
10 caster blocks with 1 shim on each end
Servo angled
Full Sauce Rear, 1/2 fronts
Speed12 body
Sorry, have to check the droop stuff.. and track widths...
#172
Tech Master
iTrader: (18)
Had first race with copperhead today, and it was weapon! Bit of set up change made it very fast. I got TQ and fastest lap of the day which is pretty sure lap record for 12th scale at my home track, about 1 sec faster than my previous personal best. I’m very happy with new car. Thanks Jason & BMI for great car!
Now all I need is few spare parts, my friend ordered more than week ago but some reason still yet to come. I hope they come before next race which is big race so I can push car harder with out fear of not having any spares.
Now all I need is few spare parts, my friend ordered more than week ago but some reason still yet to come. I hope they come before next race which is big race so I can push car harder with out fear of not having any spares.
#173
BMI Front End
have I missed or is still on in development?
have I missed or is still on in development?
#175
Tech Adept
#176
Tech Champion
iTrader: (15)
My car gets faster every time I run it. Getting comfortable with it, and tweeking the setup here and there. I am enjoying running 12th again, and the car has been just a joy to build and drive. IMHO, best car from Jason and BMI to date.
Had first race with copperhead today, and it was weapon! Bit of set up change made it very fast. I got TQ and fastest lap of the day which is pretty sure lap record for 12th scale at my home track, about 1 sec faster than my previous personal best. I’m very happy with new car. Thanks Jason & BMI for great car!
Now all I need is few spare parts, my friend ordered more than week ago but some reason still yet to come. I hope they come before next race which is big race so I can push car harder with out fear of not having any spares.
Now all I need is few spare parts, my friend ordered more than week ago but some reason still yet to come. I hope they come before next race which is big race so I can push car harder with out fear of not having any spares.
#177
Tech Champion
Hey Jason...have you checked out the front end on that new Yokomo car? Looks like an updated version of the old Delta front end...what do ya think?
#178
where did you see pictures from the yokomo car?