R/C Tech Forums - 1/12 forum

You may get that race you want... my gear is locked in Dumas' room... can't sell what I don't have. :weird: :rolleyes: I might try brushless in it for the first time this weekend.

CarlosG.

05-01-2007 08:11 AM

Good, it about darn time. :nod:

smojoe

05-01-2007 09:17 AM

you guys are worse then some old fart and a teenager fighting.

Not that you are old or anything, OD

Scottrik

05-01-2007 09:23 AM

Kids...cool out and enjoy playing with toy cars. It ain't like you're racing for the Winston Million or anything.

EricW

05-01-2007 10:36 AM

Quote:

Originally Posted by CarlosG.

I have been told to put a motor shim or waher under the front pivot ball on the t-plate. What does adding a shim under the front pivot ball on the t-plate do? I am just wondering about that.

Isn't that so the tweak screws don't dig into the chassis?

wallyedmonds

05-01-2007 03:13 PM

Quote:

Originally Posted by EricW

Isn't that so the tweak screws don't dig into the chassis?

its the angle on witch the rear pod will sit.
tweak screws should just touch the chassis or not at all.

protc3

05-01-2007 03:53 PM

Quote:

Originally Posted by EricW

Isn't that so the tweak screws don't dig into the chassis?

what it does is simulate anti squat.this will increase off power steering and add on power rear traction.the tweak screws will touch the chassis reguardless. :cool:

P2	05-01-2007 05:10 PM

Quote:

Originally Posted by CarlosG.

I have been told to put a motor shim or waher under the front pivot ball on the t-plate. What does adding a shim under the front pivot ball on the t-plate do? I am just wondering about that.

Carlos, I've always ran a shim up front in every class, asphault and carpet. Jason explained it well....listen to him.

CarlosG.

05-01-2007 05:19 PM

I have ran one ever since you and Tim told me to. I just didn't remember what it did for the car. Thanks Jason.

protc3

05-01-2007 05:26 PM

:cool: