![]() |
Where's Crashby? :)
|
Originally Posted by JRX-S Bill
Chris,
Gonna tear into that puppy and make it mo better. Probably see ya next Saturday. My 19T motor started to die about 4 laps from the end. That comm was cut to the max. Gonna miss that motor. Thinking that 19T would go better with another Rev 4. ;) Bill The Rev 4 is a barnburner with any motor in it on the rug. I would like to stiffen up my 19T car a little, it was pitching in the slow corners a little. Chris |
Originally Posted by JayBee
Where's Crashby? :)
Not a typical weekend for him... |
Originally Posted by JRX-S Bill
Crashby turned some really fast laps over the weekend; but, got tangled up a few times in the races.
Not a typical weekend for him... Crashby was doing single laps like you would not believe. Could not keep it going for 8 minutes though.... or even 2 minutes |
Originally Posted by JRX-S Bill
Crashby turned some really fast laps over the weekend; but, got tangled up a few times in the races.
Not a typical weekend for him... |
Originally Posted by Ike
Totally off topic but what do you think of your JRXS compared to your RDX? I'll probably pick up a new TC after the newyear and those are two of the main contenders.
lol, see you tuesday |
Originally Posted by Switch Blade
say it isnt so :cry: your crossing over to the dark side :rolleyes:
lol, see you tuesday |
new crc pro cuts
I noticed that the new CRC pro cuts can use flanged or unflanged bearings for the fronts. Any benefit to using one over the other. I'm guessing that using unflanged might require a bit more shimming.
|
Ike, how has tracksides tuesday night 1/12th turnout been? I will be begining my racing there around mid January. Looking forward to it. :nod:
|
Originally Posted by crimson eagle
Picco,
Check out the video here, this is where the carpet nats will be. Chris http://www.2006roarnats.com/ |
Originally Posted by GrandeGixxer
Ike, how has tracksides tuesday night 1/12th turnout been? I will be begining my racing there around mid January. Looking forward to it. :nod:
Ike: I know what you mean. Part of me wants to race my yok SD but then I need a new servo esc reciever, betteries, etc. I couldnt see myself spending that much money right now mainly because it is nonexistant :lol: |
Well that kinda sucks, Hopefully it picks up. Thats the whole reason I bought it so I could come and play when it is 20 below out. Its really hard to drive a nitro sedan in the snow. :nod:
|
Originally Posted by GrandeGixxer
Well that kinda sucks, Hopefully it picks up. Thats the whole reason I bought it so I could come and play when it is 20 below out. Its really hard to drive a nitro sedan in the snow. :nod:
|
I have been driving it here at a local carpet track that is pretty new and kinda bumpy. I can hang with the 19t sedans. It is definatly a twitchy little bastard but I think I am figuring it out. It is nice to have batteries that alow you to run a 15 minute practice run. It is a fun car to drive. I have more fun with it than I do my gas car. :nod:
|
eh who cares about 19 turn, we should just drop in 7 turns and see who can last at least 5 minutes :lol:
|
| All times are GMT -7. It is currently 05:43 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.