TC3 Forum
#8702
Brion, the chassis looks really good. It's just too bad you didn't price it competitively... Look at BMI (even though you probably already have)!
#8703
Tech Elite
Originally posted by etzkev
Brion, the chassis looks really good. It's just too bad you didn't price it competitively... Look at BMI (even though you probably already have)!
Brion, the chassis looks really good. It's just too bad you didn't price it competitively... Look at BMI (even though you probably already have)!
#8705
Tech Initiate
Originally posted by JDXray
Very nice CF Chassis!
How does it compare to others?
Very nice CF Chassis!
How does it compare to others?
As far as other comparisons I am not sure what you are asking for, Specs, Performance, adjustibility, ect...
Right now we have 5 team drivers running the car or soon to run the car, as they just got theirs.
Mike Collins - Won the ROAR Regionals
Ray Seebaugh - Currently leading RC Nation Points
Charlie Barnes
Tony Phalen - Soon to hit the track
and Bill Martinez - Getting the car ready for the Reedy Race.
Brion sohn
President
Penguin r/c
#8707
Tech Elite
Good luck. That $185 is killer.........
#8708
Tech Initiate
Price Comparison (list) of the chassis is:
BMI Extreme: $109.99 or $119.99 (depending on color)
Includes - Upper Deck, Lower Deck, and Motor Mount
Warpspeed D2: $250.00 or $270.00 (depending on color)
Includes - Upper Deck, Lower Deck, Battery Bar, and Motor Mount
IRS150 and 155: $227.94
Includes - Lower Deck, Center Deck, Side Braces, Corner Braces, Antenna Mount, and Motor Mount
Penguin r/c P5500: $184.99
Includes - Lower Deck, Side Braces, Corner Braces, Front Shock Tower, Rear Shock Tower, 5th Body Post mount, and Motor Mount
The P5500 is also the most adjustible chassis availible, Stiffness and layout wise.
We feel the price is right in line with where it should be as you get more and pay less for it. The BMI is still a little bit less than ours if you add the $50.00 that our front and rear shock towers are, other manufactures shock towers are considerably more expensive.
Hobby Shops may choose to sell the chassis for less than $184.99 but directly we do have to stay at list price so that we do not undercut our dealers.
Brion Sohn
President
Penguin r/c
BMI Extreme: $109.99 or $119.99 (depending on color)
Includes - Upper Deck, Lower Deck, and Motor Mount
Warpspeed D2: $250.00 or $270.00 (depending on color)
Includes - Upper Deck, Lower Deck, Battery Bar, and Motor Mount
IRS150 and 155: $227.94
Includes - Lower Deck, Center Deck, Side Braces, Corner Braces, Antenna Mount, and Motor Mount
Penguin r/c P5500: $184.99
Includes - Lower Deck, Side Braces, Corner Braces, Front Shock Tower, Rear Shock Tower, 5th Body Post mount, and Motor Mount
The P5500 is also the most adjustible chassis availible, Stiffness and layout wise.
We feel the price is right in line with where it should be as you get more and pay less for it. The BMI is still a little bit less than ours if you add the $50.00 that our front and rear shock towers are, other manufactures shock towers are considerably more expensive.
Hobby Shops may choose to sell the chassis for less than $184.99 but directly we do have to stay at list price so that we do not undercut our dealers.
Brion Sohn
President
Penguin r/c
#8709
Tech Elite
Originally posted by Penguin r/c
Price Comparison (list) of the chassis is:
BMI Extreme: $109.99 or $119.99 (depending on color)
Includes - Upper Deck, Lower Deck, and Motor Mount
Warpspeed D2: $250.00 or $270.00 (depending on color)
Includes - Upper Deck, Lower Deck, Battery Bar, and Motor Mount
IRS150 and 155: $227.94
Includes - Lower Deck, Center Deck, Side Braces, Corner Braces, Antenna Mount, and Motor Mount
Penguin r/c P5500: $184.99
Includes - Lower Deck, Side Braces, Corner Braces, Front Shock Tower, Rear Shock Tower, 5th Body Post mount, and Motor Mount
The P5500 is also the most adjustible chassis availible, Stiffness and layout wise.
We feel the price is right in line with where it should be as you get more and pay less for it. The BMI is still a little bit less than ours if you add the $50.00 that our front and rear shock towers are, other manufactures shock towers are considerably more expensive.
Hobby Shops may choose to sell the chassis for less than $184.99 but directly we do have to stay at list price so that we do not undercut our dealers.
Brion Sohn
President
Penguin r/c
Price Comparison (list) of the chassis is:
BMI Extreme: $109.99 or $119.99 (depending on color)
Includes - Upper Deck, Lower Deck, and Motor Mount
Warpspeed D2: $250.00 or $270.00 (depending on color)
Includes - Upper Deck, Lower Deck, Battery Bar, and Motor Mount
IRS150 and 155: $227.94
Includes - Lower Deck, Center Deck, Side Braces, Corner Braces, Antenna Mount, and Motor Mount
Penguin r/c P5500: $184.99
Includes - Lower Deck, Side Braces, Corner Braces, Front Shock Tower, Rear Shock Tower, 5th Body Post mount, and Motor Mount
The P5500 is also the most adjustible chassis availible, Stiffness and layout wise.
We feel the price is right in line with where it should be as you get more and pay less for it. The BMI is still a little bit less than ours if you add the $50.00 that our front and rear shock towers are, other manufactures shock towers are considerably more expensive.
Hobby Shops may choose to sell the chassis for less than $184.99 but directly we do have to stay at list price so that we do not undercut our dealers.
Brion Sohn
President
Penguin r/c
#8710
Yeah, warpspeed isn't $250
#8711
Tech Master
iTrader: (2)
Re: Penguin r/c P5500 Performance Chassis for the TC3
Originally posted by Penguin r/c
Penguin r/c is pleased to announce the release of the P5500 Performance Chassis for the TC3.
This chassis has proven race results capturing the 2004 ROAR Region 3 Championships in both Modified and Stock.
for more information regarding this chassis as well as ordering information please visit..
http://www.penguinrc.com/products/associated/p5500.html
If there are any questions please email us at [email protected]
Thank you
Brion Sohn
President
Penguin r/c
Penguin r/c is pleased to announce the release of the P5500 Performance Chassis for the TC3.
This chassis has proven race results capturing the 2004 ROAR Region 3 Championships in both Modified and Stock.
for more information regarding this chassis as well as ordering information please visit..
http://www.penguinrc.com/products/associated/p5500.html
If there are any questions please email us at [email protected]
Thank you
Brion Sohn
President
Penguin r/c
#8712
Tech Initiate
Originally posted by True R/C Racing
Warpspeed is like $120-140
Warpspeed is like $120-140
If they are actually selling it for $120.00 to $140.00 they are undercutting their own published pricing..
A Hobby Shop if they chose to may be able to match that price with the P5500, however, that would be entirely up to them.
Brion Sohn
President
Penguin r/c
#8714
Tech Initiate
Originally posted by nashrcracer
no one pays retail or list for a kit.
no one pays retail or list for a kit.
however what is kinda interesting in the whole pricing thing is if you take BMI's Kit and add the Shock Towers which are not included with the kit you would be taking that $110.00 or $120.00 price up to $160.00 - $170.00 ($50 for Graphite Shock towers, $18 for graphite corner Braces)
Only $15 - $25 less than the Retail price of the 5500 without as many options. for tuning or layout.
Then take Warpspeeds chassis at a street price of $120 - 140 and add just the shock towers and you are at $170 - $190 essentially the same price without the options and track record.
Then if you can get a dealer to order you one and give a discount from retail you would actually be getting more car than either of the above for less money. Hence why the price of this chassis kit is where we belive it should be especially given all the development put into it to make it a proven winner before even being released to the public.
Anyway, we will let the chassis performance speak for itself as it is one of the only aftermarket chassis to win a major ROAR event in Touring cars.
and we are shooting for more.
Brion Sohn
President
Penguin r/c
#8715
Tech Adept
Brion, i reckon it looks pretty awesome and the price is pretty good, for what you get it seems to me like good value
about the bearings/bushings in lightweight diffs: the old steel diffs used bearings, when the newer ones came out asso switched to thinner bushings, claiming bearings wouldn't work for some reason. They have since (i believe) released a bearing for the lightweight hubs which has the same dimensions as the bushings (thinner than the old bearings for steel diffs), so depending what bearings you have they may or may not fit
DaveW: I only know of one other thing you could try, there are these cool magnet things you can get that go onto the speedy's motor wires that are supposed to reduce glitching. i don't know what they're called or where to get them, but they're the things you see on PS2 controller leads and many 12v charger input leads
Cain, not sure if you are still getting that pinching, but the fix is simply to leave the screws quite loose, I think there's a small note somewhere in the manual about it saying if you overtighten the screws the cap will pinch the bearings, just watch out for it)
about the bearings/bushings in lightweight diffs: the old steel diffs used bearings, when the newer ones came out asso switched to thinner bushings, claiming bearings wouldn't work for some reason. They have since (i believe) released a bearing for the lightweight hubs which has the same dimensions as the bushings (thinner than the old bearings for steel diffs), so depending what bearings you have they may or may not fit
DaveW: I only know of one other thing you could try, there are these cool magnet things you can get that go onto the speedy's motor wires that are supposed to reduce glitching. i don't know what they're called or where to get them, but they're the things you see on PS2 controller leads and many 12v charger input leads
Cain, not sure if you are still getting that pinching, but the fix is simply to leave the screws quite loose, I think there's a small note somewhere in the manual about it saying if you overtighten the screws the cap will pinch the bearings, just watch out for it)