Hello. Is there type of rebuild kit for the N2159 motor? I took mine apart and cleaned it with brake cleaner. Also, can these be used for off-road. The ESC is a reventon. Also, is there a way to program these without a program box? My esc is sensored but I don't have the sensor cable. Can this setup still be used sensorless? If so do I have program it to be sensorless or will the esc know to automatically be sensorless if it doesn't sense the cable present? Thanks

Yes, the esc will work with any brushless motor either with or without the sensor cable. And of course, there is a performance differences between the 2.

the v4 21.5 is fast and cool. runs within .10 of my team powers but 3deg warmer. i will play with it for a while and update.

Tried to run my 13.5 speed passion system in mod 1/10 latemodel class and I was getting lapped.
Probably going to run it in my TC4 touring car when I get it.
It was a ready to run system with forward only with brake.
It came outa my Durango DEX 210.
It think it will be perfect in a touring car.
But its not fast enough for anything else I have.

If your track allow the to add motor timing, there are 4 different choices of timing that you can add onto the V3 motor to increase speed. For TC, I would said using Green board set in the middle and gear to 4.0 final drive (depends on the track size, indoor or outdoor).

Is it still a better idea to use the Muchmore software to Program the Speed Passion Reventon Pro or has SP updated their software to eliminate the need

Never felt the need to use the MMR version. :)

Anyone know where I can send my Reventon Pro for service?

Thanks. Is there. What's the best way to clean the motor? Also can ESC be programmed without software? I'm using combo sensorless setup.

Hi

Setting up a SP aventador R 80A esc for a friend. Does anyone have a link or PDF of the manual for the programming?

Thanks in advance

Geoff

IS the lastest software for the Reventon PRO(original) the 2014 download from the site version 1.1.0.25??

IF not where are you downloading the latest?

Thanks

i updated all my speedpassion esc's to the latest software above.
ALL now have a very minimal cogg. 2x revention pros 1.1
2x revention r :flaming: it would not be an issue for most but i run F-1
and is a very light car and I am Veeerrryyy picky:sneaky:
I will dump the whole lot for 65 shipped if anyone interested.
1 revention r is brand new 1 pro 1.1 is also new.
If you can find the old version of the software v21 which is what I had loaded on all they will work perfect. I unstalled the old version v21 b4 installing the new and that killed me as i could not revert:cry:i had to remove the v21 b4 installing the new spftware:cry:
Sold them all...hope he can find v21:)

This shed some light on my situation since speed passion (speedpower?) seems to not be interested in assisting me. My fresh Pro has a nasty cog anything under 1/8th throttle/barely rolling. If I get on a hill or something, it wont budge, just shudder. Obviously replaced everything (motor,cable) 2x while waiting to hear back from them... Still haven't heard back. Is it what you experienced? Is it a software problem ?

I have a copy of V21 software if anyone needs it. PM me and I can email it or upload to a shared location somewhere maybe.

Has anyone else noticed that the android app is no longer available in the google play market? Has Speedpassion stopped caring that much? Very disappointing...