Me 3,

Regards
Gary

me4

Never Owned a hobbwing esc before...

Hey Guy's,

Just got myself a SpeedPassion GT2.1 Prostock, my question is which software do I download from the SP website?

I will be running 21.5.

Thanx in advance

Yeah, but you know, after 5 minutes, a 1/8th comes in for refueling, and goes on again....

Phil, do you actually know with which manufacturer the new Orion ESC is developed?.....

Download the latest firmware V1.36 from the link below. If your running boosted, flash 323. If your running Zero timing, flash 508 no timing.

http://www.speedpassion.net/en/produ...ESC&t=download

yeah I spoke to Jilles about it , looks nice

The manufacturer is Hobbywing

I have the Citrix 21.5 and ko propo UR-5 radio and have set up my esc a few times per instructions. My problem is I can't get the brakes to work. Can anyone assist on this situation?

Even with the brakes set to 100% on the ESC, when you run a 21.5 or 25.5 without boost (we use both in our USGT and USVTA classes here), the brakes always seem weak. I believe it has more to do with the motor wind than the ESC itself, since a 13.5 in the same application has a good amount of braking.

Hello, anyone using 2.1 EX with 1S?
First the custom cut off only goes from 3,5v up, i want to put it in 3,2 or else he cuts very early.
No i'm running with no cut off with a 5200 lipo and when i reach half of the charge the car start to fail, i've read this ESC have a internal booster, anyone now the reason of the early fail?

I don't think it works very well, you have to run cut off in off.

Yes, now i'm running off, but the car starts to fail with half the battery.

SP2.1EX with 7,5T v3 on 1/12th car

Do you think the fail came from low voltage on the receiver? i've switched from LPF to this one because the internal booster.

What program now is used by top drivers in Modified? I hear that 323 Stock is in testing in Modi class.
But what settings, different gearing?