R/C Tech Forums - The Speed Passion Thread

R/C Tech Forums (https://www.rctech.net/forum/)

- Electric On-Road (https://www.rctech.net/forum/electric-road-2/)

- - The Speed Passion Thread (https://www.rctech.net/forum/electric-road/288105-speed-passion-thread.html)

Quote:

Originally Posted by Boz (Post 7822311)

I'm just building a B4 and was wondering if you could get away with not using a fan on the ESC (GT 2.0 Pro)? I'll be running a V3.0 motor (8.5)

no problem to 6.5t

dith one off you tryed to use the 528 stock software on the gt2.0 pro speedo.
the site says only for 2.1 prostock.?

Quote:

Originally Posted by S.A.W (Post 7818776)

Hi,

I was reading through the 'Basic Starting Setups for Supercharger Software' and it says,

I'm also using the SP motors, so does this mean I could set the motor timing to 0deg and then the timing on the esc to option 5 (15,00) or could I also leave the the motor at 5deg and the speedo to option 4 (11,25) giving approximately 15deg is this still the same thing ?

Sorry but trying to understand more about timing and all these esc settings :(

Tried using the settings and instructions today from 'Basic Starting Setups for Supercharger Software' with my SP 13.5t

found them very hard to understand and the car was soo slloooww no mater what I geared it too, so decided to follow the 'Word' guide can't remember the name but that suggests a gearing of 7.0 - 6.5 which I found worked very well.

What confused me on these instructions was for 10.5t it suggests 5.5 - 6.0fdr, I thought it would need to be geared higher eg 7.0 - 8.0 for the lower turn motors :confused:

Quote:

Originally Posted by marcel p (Post 7823362)

dith one off you tryed to use the 528 stock software on the gt2.0 pro speedo.
the site says only for 2.1 prostock.?

yes i used it and it works great. just make sure you update your LCD progamer before anything.

oke
i have now v1.06-100617

How do I update my LCD Programmer?

Rob...........

Quote:

Originally Posted by Robio (Post 7824700)

How do I update my LCD Programmer?

Rob...........

go to speedpassion site look for lcd programmer in products then u will see the download 1.33

Quote:

Originally Posted by marcel p (Post 7823352)

no problem to 6.5t

Yes No Problem at all ! I run an 8.5 and the motor is barely 80 degrees and speedo close to same! And I use a 2.1 speedo, yours should run smoother for Mod.

Quote:

Originally Posted by marcel p (Post 7823362)

dith one off you tryed to use the 528 stock software on the gt2.0 pro speedo.
the site says only for 2.1 prostock.?

ive been running 528 since its release on a 2.0 no problems

Quote:

Originally Posted by mr crum (Post 7826632)

ive been running 528 since its release on a 2.0 no problems

thanks;)
one more thing:lol:
wat is the bigest diferents from stock 422 to 528 stock.

Quote:

Originally Posted by marcel p (Post 7827760)

thanks;)
one more thing:lol:
wat is the bigest diferents from stock 422 to 528 stock.

a little bit more punch and cooler motor temps. other than that i havent noticed any difference.

thanks.
wil try it;)

Quote:

Originally Posted by marcel p (Post 7827760)

thanks;)
one more thing:lol:
wat is the bigest diferents from stock 422 to 528 stock.

better mid range and as said before i cooler temps

Hi is it possible to run the Stock 2.1 without the cooling fan when running 13.5?

Quote:

Originally Posted by 008-Racer (Post 7831040)

Hi is it possible to run the Stock 2.1 without the cooling fan when running 13.5?

yes. i run an 8.5 with a 2.1 , and no cooling fan. But it does depend on your settings, where I run offroad and not alot of timing as onroad. Just keep an eye on your temps as usual with any combination.