57LikesThe Speed Passion Thread
05-15-2009, 08:42 AM
#211
Played around with the software hooked up to the pc and see what you mean.
Thanks
Thanks
05-15-2009, 02:34 PM
#216
possibly could we get a list of teh updates and what they are ??
05-16-2009, 07:25 AM
#218
can anyone post a color/pin sequence for the sensor lead.
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF.
I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine.
Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking.
I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires.
should the wires be the same sequence on both plugs ???
My plugs are as follows
red, blue, white, green, yellow, black
red, blue, green, white, yellow, black
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF.
I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine.
Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking.
I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires.
should the wires be the same sequence on both plugs ???
My plugs are as follows
red, blue, white, green, yellow, black
red, blue, green, white, yellow, black
05-16-2009, 10:37 AM
#219
Tech Fanatic
well i hve a question i just got the pro 2.0 why the wire not aolider to the post like most esc on the market and the instruction seem hard to understand to a point im sure it good product it my thought to ask
05-16-2009, 11:11 AM
#220
can anyone post a color/pin sequence for the sensor lead.
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF.
I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine.
Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking.
I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires.
should the wires be the same sequence on both plugs ???
My plugs are as follows
red, blue, white, green, yellow, black
red, blue, green, white, yellow, black
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF.
I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine.
Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking.
I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires.
should the wires be the same sequence on both plugs ???
My plugs are as follows
red, blue, white, green, yellow, black
red, blue, green, white, yellow, black
05-16-2009, 11:25 AM
#221
"In the US" I don't know of any sensor leads different, all brands have the same wiring order on the motors and ESC's
can anyone post a color/pin sequence for the sensor lead.
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF.
I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine.
Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking.
I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires.
should the wires be the same sequence on both plugs ???
My plugs are as follows
red, blue, white, green, yellow, black
red, blue, green, white, yellow, black
I just fitted a SP13.5 and 17.5 along with GT2.0 and a GT2.0 LPF.
I hooked up everything to my 17.5 and it wouldnt turn over unless i gave the spur gear a push and imediately stop. Took out sensor wire and it runs fine.
Took sensor wire from 13.5 and it runs fine. was worried i fried somthing or wired incorrectly as motor got hot and started smoking.
I cant check against the other lead as the sensor lead has black wires and the one in question is colored wires.
should the wires be the same sequence on both plugs ???
My plugs are as follows
red, blue, white, green, yellow, black
red, blue, green, white, yellow, black
05-16-2009, 02:22 PM
#222
so both plugs should have the same order correct !?!?
Thankfully it didnt stuff up the esc and motor just got the motor hot but its running fine now.
05-16-2009, 05:45 PM
#224
I also tried the speedy "not connected to the receiver" switched it back on after calibration it will still go into the default mode.(when you check the settings using the pad -its not in factory default mode)
Noting tho for the above :
Motor coggs it has very little or no brake - all braking options on speedy set to MAX.
Noting tho for the above :
Motor coggs it has very little or no brake - all braking options on speedy set to MAX.
05-18-2009, 07:12 AM
#225
First I would like to say I am not that good with the computer. I have GT Pro 2.0. and I bought the lcd card also. I put the cd in and there are two links one on the left I can down load and save. The one on the right it just keeps going on the net and then ask me if it is ok to do so and over and over. Is that normal do I just need one of them. Also how or where do I get updates for it. Thank you. I know it is hard to understand what I am typing.