"Ask" Jilles Groskamp Tamiya 416 & 417, Team Orion Motors
#871
Tech Rookie
OK thanks guys , guess i need some short(EVO) arms then,
Thanks Skittee and Craig.
Thanks Skittee and Craig.
#872
Hi, looking for a set-up for Rubber (sorex 28) on Carpet for a newly built 416X. I race on quite a small tight and twisty indoor track.
Do you have a set up sheet completed that fits this criteria that you could post up?
Your advice would be much appreciated.............
Do you have a set up sheet completed that fits this criteria that you could post up?
Your advice would be much appreciated.............
#873
jills, congrat 2u on your RCA win.
some minor suggestion, it be cool if u post your winning pic as your avatar. what do u think?
some minor suggestion, it be cool if u post your winning pic as your avatar. what do u think?
#874
Tire treatment for RCA
Any advice on the Sweep tires to be used for the TITC at RC Addict?
What traction compound to apply? Do you tweaked the tires?
Do you prep your tires differently when the track is at its hottest?
Thank you.
What traction compound to apply? Do you tweaked the tires?
Do you prep your tires differently when the track is at its hottest?
Thank you.
#876
#877
Jilles in your Sbirds setup you used 2 o-rings on the shocks. What does this mean exactly?
#879
sorry for the silly question... but can some one please explain the difference between Tamiya short springs and regular touring car springs? I searched this thread and couple others with no luck
thanks
thanks
#880
Vitomon,
If you look at previous set-up sheets of most of the TRF drivers you will see anti-dive is used most of the time. It gives more aggressive steering into the corner.
Mark,
I use a Nosram Pearl speedo for Modified. Most of the time I use a 4.5T motor outdoors and 5.5T indoors
416X has more rear traction then 416We.
Orzel24,
What you mean by steering brace?
6-6 downstop gave little more reaction in slow chicane.
Karl,
The Evo arm are the short arm,now they come standard in the 416X, 416/416WE had longer arms.
Dameetz,
My set-up for Mod at RC Addict is almost identical to the Worlds 2008 set-up.
I use LTC-R body instead of Speed6.
Jonest,
Thanks Ride Cup was really cool. Great battle between Surikarn, Hara and me. Pretty cool to race against these World Champs!
scarecrow,
Thanks, you are welcome. Snowbirds was great and I really enjoyed it.
The Oval was awesome, especially the 600 laps enduro was really cool and intense. Hope to see you all next year!!
CLK@racing,
Check: www.rcblood.com
The control tyre for Modified will be Much More and not Sweep.
Sweep and Much More are two complete different tyres.
I prepare them with FX2, this additive works best.
Jonest,
My latest set-up for Mod/Lipo at RC Addict is as follow:
- Motor Orion 4.5T 2mm timing standard rotor
- ESC Nosram Pearl 1,2,1,1
- Gear 105/28 = 7.7
Apex,
Two o-ring gives little more dampening, little more traction.
Dsyed1,
Don't know about short/long Tamiya springs. Maybe it has something to do with Mini spring/TC spring?
See you all soon at TITC!!
Jilles
If you look at previous set-up sheets of most of the TRF drivers you will see anti-dive is used most of the time. It gives more aggressive steering into the corner.
Mark,
I use a Nosram Pearl speedo for Modified. Most of the time I use a 4.5T motor outdoors and 5.5T indoors
416X has more rear traction then 416We.
Orzel24,
What you mean by steering brace?
6-6 downstop gave little more reaction in slow chicane.
Karl,
The Evo arm are the short arm,now they come standard in the 416X, 416/416WE had longer arms.
Dameetz,
My set-up for Mod at RC Addict is almost identical to the Worlds 2008 set-up.
I use LTC-R body instead of Speed6.
Jonest,
Thanks Ride Cup was really cool. Great battle between Surikarn, Hara and me. Pretty cool to race against these World Champs!
scarecrow,
Thanks, you are welcome. Snowbirds was great and I really enjoyed it.
The Oval was awesome, especially the 600 laps enduro was really cool and intense. Hope to see you all next year!!
CLK@racing,
Check: www.rcblood.com
The control tyre for Modified will be Much More and not Sweep.
Sweep and Much More are two complete different tyres.
I prepare them with FX2, this additive works best.
Jonest,
My latest set-up for Mod/Lipo at RC Addict is as follow:
- Motor Orion 4.5T 2mm timing standard rotor
- ESC Nosram Pearl 1,2,1,1
- Gear 105/28 = 7.7
Apex,
Two o-ring gives little more dampening, little more traction.
Dsyed1,
Don't know about short/long Tamiya springs. Maybe it has something to do with Mini spring/TC spring?
See you all soon at TITC!!
Jilles
#881
Hi jilles
looking forward to getting to the track next week
Was woundering if you will be using the x or the we for titc
and if you can share any setup tips at this point
Thanks wayne
P.s looking forward to meeting you
looking forward to getting to the track next week
Was woundering if you will be using the x or the we for titc
and if you can share any setup tips at this point
Thanks wayne
P.s looking forward to meeting you
#882
JGH,
Did you lighten or remove any parts from your MO5 for the Ride Cup race? I see in the pictures, lots of highly modified mini chassis's. Do you have a good starting point for the mini springs?
Thank you,
Regards,
calvin.
Did you lighten or remove any parts from your MO5 for the Ride Cup race? I see in the pictures, lots of highly modified mini chassis's. Do you have a good starting point for the mini springs?
Thank you,
Regards,
calvin.
#883
Vitomon,
If you look at previous set-up sheets of most of the TRF drivers you will see anti-dive is used most of the time. It gives more aggressive steering into the corner.
Mark,
I use a Nosram Pearl speedo for Modified. Most of the time I use a 4.5T motor outdoors and 5.5T indoors
416X has more rear traction then 416We.
Orzel24,
What you mean by steering brace?
6-6 downstop gave little more reaction in slow chicane.
Karl,
The Evo arm are the short arm,now they come standard in the 416X, 416/416WE had longer arms.
Dameetz,
My set-up for Mod at RC Addict is almost identical to the Worlds 2008 set-up.
I use LTC-R body instead of Speed6.
Jonest,
Thanks Ride Cup was really cool. Great battle between Surikarn, Hara and me. Pretty cool to race against these World Champs!
scarecrow,
Thanks, you are welcome. Snowbirds was great and I really enjoyed it.
The Oval was awesome, especially the 600 laps enduro was really cool and intense. Hope to see you all next year!!
CLK@racing,
Check: www.rcblood.com
The control tyre for Modified will be Much More and not Sweep.
Sweep and Much More are two complete different tyres.
I prepare them with FX2, this additive works best.
Jonest,
My latest set-up for Mod/Lipo at RC Addict is as follow:
- Motor Orion 4.5T 2mm timing standard rotor
- ESC Nosram Pearl 1,2,1,1
- Gear 105/28 = 7.7
Apex,
Two o-ring gives little more dampening, little more traction.
Dsyed1,
Don't know about short/long Tamiya springs. Maybe it has something to do with Mini spring/TC spring?
See you all soon at TITC!!
Jilles
If you look at previous set-up sheets of most of the TRF drivers you will see anti-dive is used most of the time. It gives more aggressive steering into the corner.
Mark,
I use a Nosram Pearl speedo for Modified. Most of the time I use a 4.5T motor outdoors and 5.5T indoors
416X has more rear traction then 416We.
Orzel24,
What you mean by steering brace?
6-6 downstop gave little more reaction in slow chicane.
Karl,
The Evo arm are the short arm,now they come standard in the 416X, 416/416WE had longer arms.
Dameetz,
My set-up for Mod at RC Addict is almost identical to the Worlds 2008 set-up.
I use LTC-R body instead of Speed6.
Jonest,
Thanks Ride Cup was really cool. Great battle between Surikarn, Hara and me. Pretty cool to race against these World Champs!
scarecrow,
Thanks, you are welcome. Snowbirds was great and I really enjoyed it.
The Oval was awesome, especially the 600 laps enduro was really cool and intense. Hope to see you all next year!!
CLK@racing,
Check: www.rcblood.com
The control tyre for Modified will be Much More and not Sweep.
Sweep and Much More are two complete different tyres.
I prepare them with FX2, this additive works best.
Jonest,
My latest set-up for Mod/Lipo at RC Addict is as follow:
- Motor Orion 4.5T 2mm timing standard rotor
- ESC Nosram Pearl 1,2,1,1
- Gear 105/28 = 7.7
Apex,
Two o-ring gives little more dampening, little more traction.
Dsyed1,
Don't know about short/long Tamiya springs. Maybe it has something to do with Mini spring/TC spring?
See you all soon at TITC!!
Jilles
#884
#885