T.O.P. Racing "Photon" 1/10 EP Touring Car
#6347
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
Shout out to the TOP DRIVERS heading out to the indoor champs this week!!
#6348
Tech Master
iTrader: (17)
I wouldn't recommend running a gear diff on low bite or high bite for that matter. The gear diff tends to make the car "stay in the corner" so on Corner exit you'll be chasing your tail trying to correct the lose off condition. I feel into that trap at the Halloween classic.
#6351
lipo chassis for high carpet
any suggestions for med/high grip carpet? med or stiff (1350g)
#6352
R/C Tech Elite Member
iTrader: (28)
i'd suggest starting with the new Lipo Chaiss (Stiff - 2.25mm isotropic carbon fiber) that is included within the current kit - International Edition (or US Spec): http://www.rctech.net/forum/electric...ml#post8192254
i'd recommend starting w/ the most recent setup that Larry posted - http://www.rctech.net/forum/electric...ml#post8187019
i'd recommend starting w/ the most recent setup that Larry posted - http://www.rctech.net/forum/electric...ml#post8187019
#6353
R/C Tech Elite Member
iTrader: (28)
nope - but the concepts are the same. you can download the XRay setup guide for free - http://www.teamxray.com/teamxray/sho...p?file_id=6143
i'd also recommend picking up a copy of Martin's setup guide - http://www.xxxmain.com/bookz.shtml . this book is available from a ton of different retailers...
i'd also recommend picking up a copy of Martin's setup guide - http://www.xxxmain.com/bookz.shtml . this book is available from a ton of different retailers...
#6357
i'd suggest starting with the new Lipo Chaiss (Stiff - 2.25mm isotropic carbon fiber) that is included within the current kit - International Edition (or US Spec): http://www.rctech.net/forum/electric...ml#post8192254
i'd recommend starting w/ the most recent setup that Larry posted - http://www.rctech.net/forum/electric...ml#post8187019
i'd recommend starting w/ the most recent setup that Larry posted - http://www.rctech.net/forum/electric...ml#post8187019
#6358
What are the length of the front and rear belts? I don't need the tooth count.
#6359
#6360
516 front and 189 rear. thanks